Bathroom Vanity Installation Cost - One Written Price, No Change Orders

How Much Does Bathroom Vanity Installation Cost in Dallas?

Bathroom vanity installation in Dallas typically costs between $800 and $3,000 for a standard single-sink unit, including labor and basic hookups. Most homeowners in Dallas neighborhoods like Lake Highlands, Richardson, and Plano pay around $1,400 for a mid-range vanity with no plumbing relocation. A basic builder-grade swap runs closer to $800, while a custom double vanity with stone countertops and premium fixtures lands at $3,000 or slightly above.

That’s the straight number. The range exists because no two bathrooms are plumbed the same way, and the materials you pick move the price more than anything else. A $300 vanity from a big-box store installs for one price; a Wellborn cabinet with a Cambria top installs for another.

At Bradford Remodeling Co Dallas, we put the price in writing before a single tool comes out of the truck. No numbers that move at the door. That’s The Garrison Standard, and it’s been our operating rule since the company joined the Garrison Partners family in 2004. If you’re still shopping around, our home page walks through how we run every job.

Key takeaways:

• Typical Dallas vanity installation: $800 – $3,000 total.
• Labor alone: $400 – $1,200 depending on plumbing work required.
• Plumbing relocation, custom cabinetry, and stone tops push the price to the top of the range.
• Written pricing before work starts is standard practice at Bradford Remodeling, not an add-on.
• Every completed job carries the 365-Day Done Right Promise in writing.

Bathroom Vanity Installation Cost Breakdown (2026)

Here’s what the money actually buys in Dallas. We break every quote into line items so you can see exactly where each dollar goes. That’s not a courtesy; it’s how a written price works.

Line Item	Typical Dallas Range	Notes
Vanity cabinet (stock, 24″ – 36″)	$250 – $800	Big-box and builder-grade units land here.
Vanity cabinet (semi-custom, 36″ – 60″)	$800 – $2,000	KraftMaid and Wellborn lines fall in this range.
Countertop (cultured marble or laminate)	$150 – $500	Included with many stock vanities.
Countertop (quartz or natural stone)	$500 – $1,500	Cambria and Caesarstone fabricator pricing.
Faucet (Kohler or Moen)	$150 – $600	Homeowner-supplied or supplied through us.
Labor (basic swap, no plumbing changes)	$400 – $700	Removal, leveling, hookup, caulk, cleanup.
Labor (supply line or drain relocation)	$700 – $1,200	Moving plumbing is the single biggest labor cost.
Old vanity and debris haul-off	$50 – $150	Often rolled into labor; ask your contractor.

These are Dallas market numbers for 2026, not national averages. The same job in Highland Park runs higher than in Mesquite because the houses are older, the walls are less forgiving, and the existing plumbing was rarely installed with a modern vanity in mind. That matters when you’re comparing quotes.

What drives the price up

• Moving the drain. If your new vanity sits wider or narrower than the old one, the p-trap and supply lines have to move. In a slab foundation, this can add a day of labor. Dallas homes built in the 1960s and 1970s, particularly in areas like Preston Hollow and Casa Linda, often have cast-iron drain lines that take more time to tie into correctly.
• Double vanities. Two sinks mean two drain assemblies, two faucet sets, and a cabinet that runs 60 to 72 inches. A double vanity installation in Dallas runs $1,800 to $3,000, and that’s before you pick the countertop.
• Wall-hung vanities. Floating vanities need blocking inside the wall to carry the weight. If the wall wasn’t framed for it, the drywall comes open, blocking goes in, and the wall gets patched and repainted. It’s an extra $300 to $600 most people don’t plan for.
• Stone tops. Quartz runs $75 to $150 per square foot fabricated and installed in Dallas. A 60-inch double vanity with a Cambria top can add $900 to $1,400 over a stock cultured marble top.

What keeps the price down

• Same-footprint swaps. If the new vanity lands in the same spot with the same rough-in width, labor drops to the bottom of the range. This is the most common scenario.
• Stock cabinets. A 30-inch or 36-inch stock vanity in a box installs in an afternoon. You pay for the unit and half a day of labor, and you’re done.
• Keeping existing plumbing fixtures. Reusing your current faucet, supply lines, and p-trap saves $150 to $400, assuming they’re in serviceable shape.

Bradford Remodeling carries KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, and Kohler and Moen fixtures as documented, name-brand standard options. You’ll know the exact model numbers before you sign anything, and the manufacturer warranties sit on top of our own written guarantee.

What Affects Bathroom Vanity Installation Pricing in Dallas

Dallas has its own pricing logic, and it’s worth understanding before you start collecting quotes. Here’s what actually moves the number.

1. Foundation type and existing plumbing

Most Dallas homes sit on concrete slabs, and the drain lines run through or below the slab. If your vanity swap requires moving a drain, the plumber may be cutting concrete or working through an existing chase. That’s slower, more expensive work than a pier-and-beam house where the drain is reachable from a crawlspace. Homes in older Dallas neighborhoods like Oak Cliff and East Dallas frequently have cast-iron drains that are 50 to 70 years old, and those tie-ins demand extra care.

2. Vanity width and rough-in compatibility

The standard rough-in for a bathroom sink drain is 18 to 21 inches off the finished floor. If you’re moving from a 24-inch vanity to a 48-inch double, the rough-in has to move. If the cabinet has drawers instead of doors on one side, the p-trap needs a shallower profile or a re-route. These are the small things that separate a clean install from a leak waiting to happen.

3. Cabinet material and construction

Particle-board vanities with thermofoil fronts cost the least, and in a dry, well-ventilated bathroom they can hold up for years. But bathrooms see humidity swings that Dallas’s hot summers amplify. Plywood boxes and solid-wood doors, the kind you get in KraftMaid and Wellborn lines, cost more on the front end and hold up longer. Countertop choice follows the same logic: cultured marble is the budget standard, quartz is the daily-use workhorse, and natural marble asks for sealing and care.

4. Faucet and hardware selection

A Kohler or Moen faucet in brushed nickel runs $150 to $350. The same faucet in a specialty finish or a touchless model climbs past $500. You can cut here if you want, but we tell clients the same thing every time: the faucet is the most-used moving part in the bathroom. Buy the better cartridge. It’s cheaper than a callback.

5. Permit requirements in Dallas and surrounding cities

A straight vanity swap with no plumbing relocation generally does not require a permit in most Dallas suburbs. The moment you move a drain line, open a wall to move supply lines, or add a new sink location, a plumbing permit enters the conversation. The City of Dallas and cities like Richardson, Plano, and Garland each administer their own permitting process, and permit fees, while modest, add time to the schedule. A contractor who quotes a plumbing relocation without mentioning permits hasn’t finished quoting the job.

6. Access and site conditions

If the bathroom sits at the back of a second-story hallway with a tight turn at the top of the stairs, the cabinet gets carried up wrapped in moving blankets and that takes two people and patience. If the old vanity was glued to the wall with construction adhesive and the shutoff valves are frozen, removal takes longer. These are real-site conditions in Dallas houses built in every decade since the 1940s, and they all touch the final number.

How to Save on Bathroom Vanity Installation

Saving money on a vanity install doesn’t mean cutting corners. It means making choices that reduce labor hours and avoiding changes once the work starts. Here’s what actually works.

Keep the new vanity in the same footprint

The single biggest line item in any vanity quote is plumbing relocation. If you buy a vanity that matches your existing rough-in width and depth, you skip the slab work, the drywall work, and the extra day of labor. In Dallas, that’s $400 to $900 saved on a typical job. Measure the old unit before you shop: width, depth, and the distance from the floor to the drain stub-out.

Choose stock or semi-custom over full custom

Semi-custom lines like KraftMaid and Wellborn give you door style, finish, and sizing flexibility without a full custom cabinet shop price. A full custom vanity from a Dallas cabinet shop starts around $2,500 for the cabinet alone. A semi-custom double in the same dimensions runs $1,200 to $1,800.

Do the demolition yourself, if you’re comfortable

If the old vanity comes out in one piece with shutoff valves that work, and you’re willing to remove it, you can save $150 to $300. One caveat: turn the water off at the stops first, cap the supply lines, and if the valves are the old multi-turn style that haven’t been touched in 20 years, leave the shutoff to a professional. A snapped shutoff valve under a slab bathroom turns a small job into an emergency.

Reuse the faucet and drain assembly if they’re recent

If your current faucet is less than five years old and in good shape, reuse it. A new p-trap costs less than $30 at any Dallas plumbing supply house. Reusing a serviceable faucet and drain saves $150 to $400 without touching the final look, especially if the finish matches the new hardware.

Buy the vanity through your contractor

This sounds counterintuitive until you understand trade pricing. Bradford Remodeling buys from KraftMaid, Wellborn, Kohler, and Moen at contractor rates, and those rates frequently beat big-box shelf prices on comparable lines. More importantly, when we supply the materials, the warranty path is clean: one written guarantee covers the work, and the manufacturer’s warranty covers the product. You’re not chasing a separate vendor if something fails.

We offer free estimates on every bathroom vanity installation in Dallas. Call (903) 326-8963 and we’ll give you a written number before any work starts. That’s not a sales line; it’s how our quotes work.

FAQs – Bathroom Vanity Installation Cost

How much does it cost to install a bathroom vanity in Dallas?

A standard single-sink bathroom vanity installation in Dallas runs $800 to $3,000 total, with most jobs landing around $1,400. That includes the cabinet, top, faucet, labor, and haul-off of the old unit. Custom work, double vanities, or plumbing relocation push the total to $3,000 or more. Call (903) 326-8963 for a written estimate specific to your bathroom.

Is it cheaper to repair or replace a bathroom vanity?

If the cabinet box is structurally sound and the only issues are drawer glides, hinges, or a worn faucet, repair runs $150 to $500 and makes sense. If the particle board has swollen from repeated water exposure, the laminate is peeling, or the top is cracked, replacement is the honest call: $800 to $3,000 in Dallas. Swollen cabinet boxes never get better, and a vanity that’s starting to fail will cost more to replace later. Call (903) 326-8963 and we’ll tell you which side of that line your vanity sits on.

Can you install a bathroom vanity the same day?

Yes, if it’s a same-footprint swap with working shutoff valves and no plumbing relocation. A standard single-sink vanity install takes 4 to 6 hours on site, and our crews regularly complete same-day installs throughout Dallas. If plumbing has to move or the old drain requires work, plan on a second day. Call (903) 326-8963 and we’ll tell you honestly which category your job falls into.

How much does a double vanity installation cost in Dallas?

A double vanity installation in Dallas typically runs $1,800 to $3,500, depending on cabinet quality, countertop material, and whether the drain plumbing needs to move. A 60-inch semi-custom unit with a quartz top, two Kohler faucets, and a standard rough-in conversion lands around $2,600. The second sink adds roughly $400 to $700 in labor over a single. Call (903) 326-8963 for a line-item quote on your specific layout.

Do I need a permit to replace a bathroom vanity in Dallas?

For a direct vanity swap with no plumbing relocation, no permit is required in most Dallas-area municipalities. If the drain or supply lines move, or you’re adding a sink where one didn’t exist, a plumbing permit is required, and the fee typically runs $50 to $250 depending on the city. Any contractor who quotes the work without addressing permits hasn’t given you a complete price. We handle permit documentation as part of our written scope of work. Call (903) 326-8963 to confirm what your job requires.

How much does it cost to move bathroom plumbing in Dallas?

Moving a sink drain and supply lines in a Dallas bathroom runs $700 to $1,500 depending on whether the home sits on a slab or pier-and-beam, and whether the wall is open or needs to be cut. Slab work is the more expensive scenario and takes longer. If you’re planning to move the vanity location, budget this as a separate line item. Call (903) 326-8963 and we’ll walk the site before we price it.

Why Dallas Homeowners Choose Bradford Remodeling for Vanity Installation

Most remodelers ask you to trust them. We give you the trust in writing. That’s the difference, and it’s not a slogan.

Bradford Remodeling Co Dallas is part of the Garrison Partners family, established in 2004. Every location is independently owned and operated, and every one is held to The Garrison Standard: a written price before any work starts, a documented scope of work, and a crew that shows up background-checked and in uniform. You’ll know exactly who is walking through your door before the truck pulls up.

The 365-Day Done Right Promise covers every completed project. If the vanity install fails inside the guarantee period, we return and correct it at no charge. That promise is in writing, signed, and handed to you at job close. You don’t get a handshake. You get a document.

We install documented, name-brand materials: KraftMaid and Wellborn cabinetry, Cambria and Caesarstone surfaces, Kohler and Moen fixtures. The spec sheet is part of your quote, and the manufacturer warranties sit on top of our own guarantee. No mystery brands, no unspecified “cabinet-grade” plywood, no substitutions at delivery.

When the job is done, a Bradford site looks squared away: the old vanity hauled off, the floor swept, the new unit level and caulked, the shutoff valves tested, and a signed written guarantee in your hand. That’s what done looks like under The Garrison Standard.

For a deeper look at how we approach this specific service, see our Bathroom Vanity Installation in Dallas page.

Get a Written Price for Your Bathroom Vanity Installation

You don’t need to guess, and you don’t need three bids to figure out where the honest number sits. Call Bradford Remodeling Co Dallas at (903) 326-8963 and we’ll schedule a walkthrough, price the job line by line, and put the number in writing before you commit to anything. A live person answers the phone 24 hours a day, 7 days a week. No voicemail, no callback queue, no pressure. Just a straight price and a straight answer.

Pricing reflects the Dallas market as of 2026. Bradford Remodeling Co Dallas offers free estimates – call (903) 326-8963.

Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas and surrounding communities since 2004.