Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Therma-Tru Construction
We provide Dallas Therma Tru service as an independent construction provider, focusing on entry door replacement, frame repair, rehanging, and weatherproofing. Our crews work on Therma-Tru doors every week, which means we carry the hinge, sill, and weatherstrip parts these doors actually need in Texas heat and shifting clay soils. As an independent Therma-Tru service provider, we are not authorized by or affiliated with Therma-Tru, but we use genuine Therma-Tru components where fit and sealing matter. Call (903) 326-8963 for a written price on any Therma-Tru door issue before work begins.
Dallas homeowners keep choosing Therma-Tru because the fiberglass construction holds up better than wood or steel under our sun. But the door slab is only half the story. What fails first in Dallas is usually the sill, the weatherstrip, or the hinge screws in the jamb. That’s where our daily Therma-Tru work gives us an edge: we know what actually goes wrong here, not in a generic spec sheet.
Why Trust Bradford Remodeling Co Dallas for Your Therma-Tru Construction?
Our technicians can identify a Therma-Tru Classic-Craft from a Smooth-Star by the texture and the adjustable sill profile before they touch a screwdriver. That matters when you’re deciding between a $600 repair and a $6,000 replacement. Curtis Lane, Owner at Bradford Remodeling Co Dallas, picked up his first framing hammer in a residential carpentry program at Los Angeles Trade-Technical College, and he’s spent the better part of two decades running crews across Dallas. He knows the difference between a door that needs rehanging and one that needs to come out.
We use genuine Therma-Tru weatherstrip, hinge, and sill components wherever fit and sealing are affected. When a customer wants a different finish or a lower price on a handleset or threshold, we’ll offer a quality aftermarket option and tell them exactly what they’re trading. Every Therma-Tru job gets a written price before we start, and every completed job carries the 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge. That guarantee is in writing, signed, and in your hand at close, along with a clean site and a documented scope.
Styles & brands we work with
Common Therma-Tru Construction Problems We Fix in Dallas
- Fiberglass skin delamination at the bottom rail. We see this on Classic-Craft and Fiber-Classic doors that have faced years of direct sun combined with sprinkler overspray. The fiberglass skin starts to separate from the core at the bottom edge. If caught early, we can often stabilize it. If the core is exposed, the slab needs replacement.
- Warped or swollen sills that no longer seal against the sweep. Dallas is dusty. When a Therma-Tru adjustable sill stops seating against the door sweep, you get dust and crawling insects at the threshold. The thermoset sill material can warp after repeated wet-dry cycles from monsoon-season rain followed by 100-degree heat. We replace the sill and reset the reveal.
- Weatherstrip compression set leaving a daylight gap at the latch side. The Q-Lon or compression weatherstrip on Therma-Tru doors loses its rebound after five to eight Texas summers. You’ll see daylight through the latch side and feel a draft. This is a straightforward replacement with genuine Therma-Tru weatherstrip, not a door replacement.
- Sticking or sagging doors from loose hinge screws in the jamb. Dallas’s expansive clay soils don’t just shift foundations. They shift door frames too. Original hinge screws loosen in the jamb, the door sags, and you have to shoulder it closed. We pull the screws, consolidate the stripped holes, and reset the hinges with longer screws into the studs. The doors close with one finger after that.
- Sill pan flashing failures on newer installs. When a Therma-Tru door was installed without proper pan flashing or a sill pan, water runs under the sill and rots the subfloor before the sill even shows damage. In Dallas, intense summer downpours make this worse. We fix the flashing detail, replace damaged substrate, and reinstall the sill correctly.
Therma-Tru Parts & Our Repair-vs-Replace Approach
Genuine Therma-Tru parts matter in three places: the weatherstrip, the hinges, and the adjustable sill. Those components are engineered to match the slab’s specific geometry. A generic foam weatherstrip will not seal a Therma-Tru door the same way. We stock common Therma-Tru weatherstrip profiles, hinge sets, and sill components locally for fast turnaround on the doors we service most in Dallas.
When a customer wants a specific finish or a lower price on a handleset or threshold, we’ll offer a quality aftermarket option from a documented brand and explain the difference. On the repair-versus-replace decision, we’ll tell you straight: if the slab is solid and the frame is sound, we can usually rehang and reseal the door for under $800. If the frame is rotted or the slab is delaminated, replacement is the only honest answer. Call (903) 326-8963 and we’ll give you a written price either way.
| Therma-Tru Service | Dallas Price Range |
|---|---|
| Therma-Tru door rehang and weatherstrip replacement | $400 – $800 |
| Therma-Tru entry door replacement (slab and frame) | $3000 – $8000 |
| Full Kitchen Remodeling (includes door/trim adjustments) | $14000 – $45000 |
| Full Bathroom Remodeling (door and hardware integration) | $9000 – $28000 |
Our Therma-Tru Service Process – Step by Step
- 1
Diagnosis. We identify the exact failure: is the slab delaminating, the sill warped, the weatherstrip compressed, or the jamb pulled away from the rough opening? We check the door’s reveal on all three sides and test the sweep against the sill. You get a written diagnosis with a written price before any work begins.
- 2
Repair or install. For repairs, we use genuine Therma-Tru weatherstrip, hinge, and sill components where fit and sealing matter. For replacements, we set the new frame in the rough opening, shim it plumb and square, and flash the sill pan correctly for Dallas’s summer downpours.
- 3
Test. We close and latch the door from inside and outside, check for daylight gaps, and run the sweep along the sill. If a door closes with one finger, it’s right. If it needs a shoulder, we’re not done.
- 4
Warranty. Every completed Therma-Tru job carries the 365-Day Done Right Promise in writing. If the work fails inside a year, Bradford returns and corrects it at no charge. The documented scope and signed guarantee are in your hand before we leave, along with a clean site.
We rehung a Therma-Tru Fiber-Classic entry door in Lake Highlands where the door had sagged 3/8 inch and the homeowner had to shoulder it closed. Our tech pulled the hinge screws, injected wood-epoxy consolidant into the stripped jamb holes, reset the hinges with longer screws into the studs, and installed a new Therma-Tru compression weatherstrip. The door now closes with one finger and the daylight gap is gone. That’s what “squared away” looks like at close: clean site, documented scope, signed written guarantee.
See the difference
Before
After
Before
After
Before
AfterTherma-Tru Products We Service & Install in Dallas
We work on the full Therma-Tru lineup that shows up in Dallas homes: Therma-Tru Classic-Craft fiberglass entry doors, Smooth-Star, Fiber-Classic with the mahogany grain, and the Benchmark builders’ series. Each line has its own sill profile and weatherstrip geometry, and we keep the common components in stock for the models we see most. Whether you have a Classic-Craft with a decorative glass insert or a Benchmark door on a 1990s brick-veneer home, we know the hardware and sealing details for that specific slab.
Beyond Therma-Tru doors, Bradford Remodeling Co Dallas serves as a General Contractor handling full kitchen remodeling, full bathroom remodeling, and walk-in showers. When we replace an entry door as part of a larger remodel, the door work is integrated into the same written scope and the same 365-Day Done Right Promise.
We Also Service These Brands
Bradford Remodeling Co Dallas is a multi-brand contractor. Alongside Therma-Tru doors, we install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. Our crews work from a documented roster of name-brand materials so specifications are traceable and quality is never left to guesswork.
FAQs – Therma-Tru Construction Service in Dallas
Is Bradford Remodeling Co Dallas authorized by Therma-Tru? No. We are an independent Therma-Tru service provider. We are not authorized by or affiliated with Therma-Tru, and we don’t claim to be. What we do have is daily hands-on experience with Therma-Tru doors across Dallas and a stock of genuine Therma-Tru components where they matter.
Can you replace the rotted wood frame around my Therma-Tru door without replacing the slab? Yes, if the slab itself is sound. We remove the rotted jamb sections, inspect the rough opening for hidden water damage, replace the damaged wood, and reset the existing slab in the repaired frame. Call (903) 326-8963 and we’ll tell you honestly whether the slab is worth saving.
Why is my Therma-Tru door hard to latch after a dry summer in Dallas? Expansive clay soil shrinks during drought, which shifts the door frame slightly. That movement loosens hinge screws and throws off the latch alignment. We rehang the door using longer screws into the studs and reset the reveal, then install new Therma-Tru compression weatherstrip.
Do you reuse my existing Therma-Tru glass or grille insert when replacing the door? If the insert is in good condition and matches the new slab’s profile, yes. We’ll specify that in the written scope before any work begins. If the insert is fogged or cracked, we’ll give you a separate price for a new insert.
How long do Therma-Tru sills last in Texas before they need replacement? In Dallas, a Therma-Tru adjustable sill typically lasts 8 to 12 years before the thermoset material warps or the corner seals fail. Sprinkler overspray and monsoon-season rain followed by intense heat shorten that lifespan. If your sweep no longer seals and daylight shows under the door, the sill is due.
Can you match the stain on my existing Therma-Tru Classic-Craft door when replacing a damaged slab? Yes. We use stain-grade fiberglass slabs and work with the existing finish to match the color and sheen as closely as possible. We’ll show you a test patch before the slab is installed. Call (903) 326-8963 for a written quote.
How much does Therma-Tru construction cost in Dallas? A Therma-Tru door rehang and weatherstrip replacement in Dallas runs $400 to $800. A full entry door replacement, including slab and frame, runs $3000 to $8000 depending on the model line and glass insert. Full kitchen remodeling, including door and trim adjustments, runs $14000 to $45000, and full bathroom remodeling with door and hardware integration runs $9000 to $28000. We write every price down before work starts, and that number does not move at the door. Call (903) 326-8963 for an exact quote, estimates are free.
Straight number, real scope, no surprises on delivery day.
Book Your Therma-Tru Service in Dallas, TX
Call (903) 326-8963 and a live person answers, 24/7. Tell us what your Therma-Tru door is doing, and we’ll schedule a diagnosis. You get a written price before any work starts, and every completed job carries the 365-Day Done Right Promise in writing. That’s the Bradford standard in Dallas.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
