Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Unilock Construction
Bradford Remodeling Co Dallas provides Dallas Unilock service in Dallas, TX: paver driveway and patio repair, retaining wall stabilization, and full outdoor living installations using genuine Unilock pavers and walls. We’re not a Unilock dealer and we’re not authorized by the manufacturer. What we are is a Dallas construction crew that has spent nearly two decades learning how Unilock products behave in North Texas clay soil, brutal sun, and sudden downpours, then rebuilding installations so they stay level and clean for years. Call (903) 326-8963 for a straight diagnosis and a written price before any work starts.
Unilock makes some of the best interlocking concrete pavers and segmental retaining walls on the market. Estate Wall, Brussels Block, Hollandstone, Town Hall – these are product lines we know by name because we’ve repaired, re-laid, and installed every one of them across Dallas driveways, pool decks, and backyard patios. The products are solid. What fails in Dallas is rarely the paver itself. It’s what sits underneath: the base, the drainage, the jointing. That’s the information a manufacturer’s spec sheet won’t tell you, and it’s the exact knowledge our crews bring to every Unilock job.
Key Takeaways:
- Independent Unilock service provider in Dallas – not manufacturer-authorized, but manufacturer-literate
- We diagnose base and drainage failures, not just paver symptoms
- Written price before any work starts, every time
- 365-Day Done Right Promise on every completed Unilock repair or installation
- Genuine Unilock replacement units for structural repairs; matching third-party sands and sealers for everything else
Why Trust Bradford Remodeling Co Dallas for Your Unilock Construction?
Our crews work on Unilock installations the way a builder would, not the way a handyman might. That difference shows up in the details: we check base compaction before we ever lay a block, we verify drainage gravel and weep holes behind retaining walls, and we know when a paver can be salvaged versus when it needs to come out. Curtis Lane, our owner, picked up his first framing hammer in a residential carpentry program at Los Angeles Trade-Technical College and has spent the better part of two decades running crews across Dallas, including a stretch of kitchen and bathroom gut-jobs in Lakewood where 1950s-era plaster taught him how much an old house can slow a schedule. That same patience applies to hardscape: Unilock work in Dallas fails fast when the base is rushed, and Curtis has never been interested in rushing a base.
Every Unilock job we take on starts with the same discipline we bring to a full kitchen remodel: the scope gets written down, the price gets written down, and nothing moves at the door. Our techs arrive background-checked and uniformed, and they answer to The Garrison Standard, the operating framework we’ve held to since joining the Garrison Partners family in 2004. The Garrison Code is simple to say and harder to live by: do the job right, document the work, and put the guarantee in writing before you pack up. When we finish a Unilock repair or installation, you get a signed 365-Day Done Right Promise in your hand. If the work fails inside that year, we return and correct it at no charge. No fine print, no phone tag.
Straight number, real scope, no surprises on delivery day. That’s the way Unilock work should go, and it’s the way we run every job.
Styles & brands we work with
Common Unilock Construction Problems We Fix in Dallas
Dallas is hard on hardscape. The clay soil shrinks in drought and swells after rain, the summer sun bakes unprotected surfaces for months, and the occasional hailstorm can turn a clean patio into a pitted mess overnight. Here are the issues we see most often on Unilock products in this market:
- Paver settlement in driveways and patios (Brussels Block, Hollandstone). Dallas clay expands and contracts with moisture, but the real problem is usually what’s underneath: a decomposed gravel base that has turned to soft clay, often because drainage was never properly graded. The pavers sink, the surface develops dips, and water pools where it shouldn’t. We lift the affected area, rebuild the base with clean compacted gravel and a geotextile separator, then re-lay the same Unilock units. The fix outlasts the original install because we address the base, not just the visible drop.
- Efflorescence and color fading on older pavers. Efflorescence is that white, chalky residue that appears when moisture pushes salts to the surface of the paver. In Dallas, the combination of intense UV exposure and periodic rain cycles makes it worse, and older Unilock pavers that were never sealed often show both the residue and a washed-out, faded surface. The paver is still structurally sound. We clean it, address the moisture path when possible, and apply a matching sealer to restore the color and protect the surface from further UV damage.
- Joint sand washout around pool decks and walkways. Heavy Dallas downpours can strip the polymeric sand from Unilock joints in a single season if the sand wasn’t properly activated or the gaps weren’t fully filled. Once the joints open up, ants move in, weeds take root, and the pavers start to shift. We remove the failed sand, clean the joints, and reapply fresh polymeric sand that meets Unilock’s specifications for width and depth. The key is full depth and proper activation, which is a detail a lot of quick-bid installers skip.
- Leaning or bulging retaining walls (Estate Wall, Town Hall). A retaining wall that leans in Dallas almost always has the same root cause: no drainage gravel behind the wall, no weep holes, or a base that was never properly compacted. Water builds up behind the wall during heavy rains, the clay soil behind it expands, and the wall starts to move. We rebuild the wall section by section, installing proper gravel backfill, geogrid reinforcement where the height requires it, and weep holes to let water escape. The wall stands straight because the water now has somewhere to go.
- Driveway edge chipping and broken paver corners. Dallas homeowners run over paver edges with vehicles more often than they realize, and Unilock pavers with exposed corners can chip or crack under the weight. For minor chips, we often recommend spot repair with stone-matched material rather than full panel replacement. For structural breaks, we source genuine Unilock replacement units so the color and texture match the surrounding installation.
Unilock Parts & Our Repair-vs-Replace Approach
We source genuine Unilock replacement units for critical structural repairs. When a retaining wall block has cracked or a paver has broken under vehicle load, we order the exact Unilock product line and color blend directly through our suppliers, which keeps the repair visually consistent with the original installation. For jointing sand and sealers, we use matching third-party products that meet Unilock’s specifications for performance. The reason is practical: Unilock doesn’t manufacture jointing sand or sealer, and the aftermarket products we use are the same class of material a Unilock dealer would recommend.
We also don’t recommend replacement when repair makes more sense. A driveway with a couple of chipped corners and some faded color doesn’t need to be torn out and re-laid at full cost. We’ll spot repoint the joints, replace the damaged units with matching pavers, and reseal the surface. You save thousands, and the result looks like it was installed right the first time. When the base has failed and the entire surface has shifted, that’s when we tell you the truth: patchwork won’t fix it. We’ll quote the full re-installation at a written price, and you decide with real numbers in front of you. Call (903) 326-8963 and we’ll come assess the damage and give you a line-item breakdown, free.
Our Unilock Service Process – Step by Step
Every Unilock job in Dallas follows the same sequence, whether it’s a six-paver repair or a full driveway rebuild. Here’s what you can expect from the first call to the final walkthrough:
- 1
Diagnosis and written estimate. We inspect the installation, identify the failure mode – base settlement, drainage failure, joint washout, or surface wear – and write up exactly what we’ll do and what it will cost. The price is in writing before any work starts. No numbers that move at the door.
- 2
Base and drainage correction. For any paver or wall repair, we address what’s underneath first. That means removing failed base material, compacting new gravel in lifts, installing geotextile fabric where the clay needs separation, and making sure water has a path away from the installation. This is the step that separates a lasting repair from a redo in two years.
- 3
Unilock unit installation and jointing. We install genuine Unilock pavers or wall units to the manufacturer’s specified pattern and spacing, then fill joints with polymeric sand that’s fully activated and swept to full depth. Every unit is checked for level and alignment as we go.
- 4
Site clean-up and written guarantee. The site is left clean: no debris, no leftover sand piles, no half-empty buckets. You receive a written 365-Day Done Right Promise, signed, covering the completed Unilock work. If it fails inside the guarantee period, we come back and fix it at no charge.
Unilock Products We Service & Install in Dallas
We work on the full range of Unilock products commonly installed across Dallas, including the Brussels Block paver line for driveways and walkways, the Hollandstone series for patios and pool decks, the Estate Wall system for low and mid-height retaining walls, and Town Hall pavers for larger-format hardscape applications. We also service Unilock steps, caps, and edging on existing installations. When we need replacement units, we order the specific product line, color, and texture through our local suppliers so the repair matches the rest of the installation. For standard repairs, we keep a range of matching polymeric sands and sealers on hand, which means most joint repairs can start the same week we diagnose them.
Beyond Unilock, our crews install and service paver driveways, paver patios, and roof replacements across the Dallas market as part of our General Contractor services. If your hardscape or exterior project touches more than one system, we can scope it end to end with one written price.
See the difference
Before
After
Before
After
Before
AfterUnilock Construction Cost in Dallas – Real Numbers
Here’s what Unilock-related work typically costs in Dallas. These are the ranges we quote on a regular basis, based on current material pricing and local labor rates:
| Service | Dallas Price Range |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Roof Replacement | $8,000 – $20,000 |
Exact pricing depends on square footage, base condition, whether we’re rebuilding failed substrate or working with a stable existing base, and the specific Unilock product line involved. Every estimate is line-itemed and written before work starts. Call (903) 326-8963 to schedule a free estimate and get real numbers for your project.
We Also Service These Brands
Unilock is a significant part of our Dallas hardscape and exterior work, but it’s not the only brand we touch. Our crews also install and service KraftMaid cabinetry, Cambria and Silestone surfaces, and Kohler fixtures as part of our broader remodeling contract work. That multi-brand capability matters because many Dallas homeowners run exterior and interior projects in the same year, and we can scope the whole job with one written plan and one guarantee.
FAQs – Unilock Construction Service in Dallas
Why do Unilock pavers shift and sink in Dallas clay soil, and how do you fix it?
Unilock pavers in Dallas shift and sink because the expansive clay soil beneath the base layer swells when wet and shrinks when dry, which destabilizes the gravel base and causes the pavers above to drop. We fix it by lifting the affected pavers, removing the failed base material, compacting new gravel in lifts over a geotextile separator, and re-laying the same Unilock units with fresh polymeric sand. The fix lasts because the base and drainage are corrected, not just the surface. Call (903) 326-8963 for a free assessment of your paver settlement.
Can you match existing Unilock colors when repairing only part of a patio?
Yes. We order genuine Unilock replacement units in the same product line and color blend as your existing installation through our local suppliers, so the repair blends with the surrounding surface. For older installations where the color has faded from UV exposure, we also clean and reseal the entire surface so the repaired area doesn’t stand out against the rest. Color matching is a standard part of every partial repair we quote.
Do you reseal Unilock pavers to prevent efflorescence?
Yes. Efflorescence on Unilock pavers comes from moisture carrying salts to the surface, and Dallas’s cycling between wet and dry periods makes it common. We clean the pavers to remove the residue, address any drainage issues that feed the moisture path, and apply a matching sealer that protects the surface from both moisture and UV fading. Sealing won’t stop efflorescence forever, but it significantly reduces recurrence and restores the color.
What causes joint sand to wash out of Unilock walkways, and how do you prevent it?
Joint sand washes out of Unilock walkways in Dallas when heavy rain hits joints that weren’t filled to full depth or weren’t properly activated during installation. Once the sand is gone, the pavers lose lateral support and start to shift. We prevent it by removing the failed sand, cleaning the joints, and installing fresh polymeric sand to full joint depth with proper activation. A properly worked joint holds through North Texas rain seasons.
Do you repair Unilock retaining walls that are leaning?
Yes. A leaning Unilock retaining wall in Dallas is almost always a drainage failure: water builds up behind the wall, the clay soil expands, and the wall pushes forward. We rebuild the affected section with compacted gravel backfill, geogrid reinforcement where the wall height requires it, and weep holes to release water pressure. The wall stands straight again because the water now has a controlled path to exit. Call (903) 326-8963 for a free retaining wall evaluation.
Is Bradford Remodeling Co Dallas authorized by Unilock?
No. We are an independent Unilock service provider in Dallas. We install and repair Unilock products using genuine Unilock replacement units and manufacturer-spec jointing materials, but we are not affiliated with or authorized by Unilock. This independence means our recommendations are based on what your installation actually needs, not on what a manufacturer program tells us to sell.
How much does Unilock construction cost in Dallas?
Unilock paver driveway installations in Dallas typically run $7,000 to $18,000. Paver patios run $3,500 to $11,000. If the project also involves a roof replacement, that ranges $8,000 to $20,000. Every estimate from Bradford Remodeling Co Dallas is written, line-itemed, and locked before work starts. Call (903) 326-8963 for exact numbers on your project, free.
Book Your Unilock Service in Dallas, TX
If your Unilock driveway has settled, your patio joints are washing out, or your retaining wall is starting to lean, get a straight diagnosis from a crew that has been rebuilding Garland Unilock service and Dallas-area installations for nearly two decades. Call (903) 326-8963 to schedule your free estimate. We’ll put the price in writing, scoped to exactly what your Unilock work needs, before a single tool comes out.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas and the surrounding North Texas market since 2004.
