Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Bathroom Remodeling: The Dallas Owner’s Guide
A full KraftMaid bathroom remodel in Dallas typically runs $9,000 to $28,000 installed, depending on whether you’re replacing a vanity or gutting the room to the studs. Bradford Remodeling Co Dallas stocks KraftMaid cabinetry and hardware and can match existing door styles, finishes, and dimensions without tearing out work you’d rather keep. Most Dallas homeowners call us after a drawer front cracks, a soft-close hinge gives out, or a vanity base swells from years of shower steam.
The way you find out a KraftMaid part has failed is rarely dramatic. You notice a door that won’t stay shut, a drawer that drags, or a finish that’s gone cloudy along the bottom edge. In Dallas, the humidity swings do a number on cabinetry: dry winters pull panels tight, then humid summers swell them back. KraftMaid builds for that, but no cabinet finish lasts forever. If you’re seeing wear on one piece, the smart move is to address it before moisture gets into the substrate and the repair turns into a replacement.
Which KraftMaid Models This Applies To
KraftMaid builds across several cabinet lines, and the bathroom pieces you see in Dallas homes usually come from the standard all-plywood construction lines or the veneer-center-panel options depending on the year installed. The compatibility piece that matters most is the door style and finish code. KraftMaid stamps or labels most cabinet boxes with a manufacturing date and a finish code on the inside of the sink base door or the back of a drawer box. If that label is gone, we can match by measuring the door profile and sheen.
Here’s the gotcha Dallas owners hit: KraftMaid has changed hinge mounting patterns and drawer slide spacing across production years. A door from a 2012 line will not drop onto a 2021 box without new hinge plates and possibly new pilot holes. Same goes for finish batches. KraftMaid’s glazed and painted finishes shift slightly between production runs, so a single replacement door in “Canvas” from a different year can read a shade off in bright bathroom light. We pull the original order specs when we can, and when we can’t, we order a finish sample before cutting anything.
For replacement parts, OEM KraftMaid doors and drawer fronts carry the exact match, but lead times run four to six weeks. Quality aftermarket options from local Dallas millwork shops can cut that to two weeks, but the finish match is on us to verify under your bathroom lighting, not just in the shop. We’ll show you both prices and let you decide.
Styles & brands we work with
Signs Your KraftMaid Bathroom Remodeling Is Failing
- Drawer front pulls loose or sags. The screws that hold the drawer front to the box have stripped the pilot holes. This is common on vanity drawers that get opened daily. Quick fix: re-drill and use a larger screw. What it signals: the drawer box may be racking out of square from humidity cycling common in Dallas bathrooms.
- Soft-close hinge slams or won’t hold position. KraftMaid uses integrated soft-close hinges on newer lines. The internal damper wears out, and the door either snaps shut or drifts open. The hinge itself is usually the part, not the door, and it’s a $10 to $25 part on the truck.
- Finish hazing or peeling at the bottom edge of the vanity. This is moisture wicking up from floor mopping or a small splash point. The finish fails first where water sits. If you catch it before the MDF or plywood core swells, you can refinish. If the panel feels soft to the touch, that piece needs replacement.
- Doors bind against the frame after a season change. Dallas humidity swells wood and laminate panels. If a door sticks in July but was fine in January, the panel is absorbing moisture. Adjusting the hinge can buy time. If the warp doesn’t settle when humidity drops, the door is done.
- Drawer slides grind or the drawer drops to one side. Ball-bearing slides wear unevenly when a drawer carries too much weight, especially in vanities where owners store heavy toiletries. The slide rail or the wheel carrier is worn. This is one of the few repairs we do same-visit because the part is small and the diagnosis is fast.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
Here’s what you’re looking at in Dallas, installed:
- Single hinge or drawer slide replacement: $40 – $95 per part, including labor
- Refinish one drawer front or door: $150 – $350
- Replace one drawer front (OEM KraftMaid): $180 – $400, plus finish match and lead time
- Replace a vanity door (OEM KraftMaid): $220 – $520
- Replace full vanity cabinet (KraftMaid, 24″ – 36″): $800 – $3,000 installed
- Full KraftMaid bathroom remodel (cabinets, top, fixture rough-in, install): $9,000 – $28,000
The range on the full remodel depends on whether you’re keeping the footprint or moving plumbing, whether the floor under the old vanity is rotted from years of splash, and what countertop and fixture grade you spec. Every line item is written before we start. That’s The Garrison Standard: a written price, a written scope, and a written one-year guarantee under the 365-Day Done Right Promise. If a cabinet door we installed fails inside that year, we come back and make it right at no charge.
DIY or Call Us?
You can safely check a few things yourself: tighten hinge screws with a hand screwdriver (not a drill, which can strip the wood), wipe down slides and check for debris, and look for the finish code label inside the sink base. If a screw hole is stripped, don’t keep driving the same screw deeper. That pushes the problem into the panel.
What you shouldn’t do is try to replace an integrated soft-close hinge on a KraftMaid door while it’s still mounted and under tension. The hinge is small, but a loaded hinge snapping closed can pinch a finger badly. Same rule on removing a drawer box with soft-close slides still attached to both sides. We show up with the right parts, and most single-part replacements are done inside an hour. If you’re in Dallas and your KraftMaid vanity is showing age, call (903) 326-8963. We’ll give you a straight price before anything gets unbolted.
FAQs
KraftMaid bathroom cabinetry in Dallas typically holds up 15 to 20 years before doors or drawer fronts need real attention, and longer if the bathroom has good exhaust ventilation and the vanity is sealed properly along the toe kick. Dallas humidity swings shorten the finish life on lower panels if water sits. We also stock and install Cambria, Silestone, and Kohler for bathroom remodels that need more than cabinetry.
Yes, if the core is solid and only the finish is worn, we can strip and refinish a door or drawer front for $150 to $350. If the panel is swelled, split, or soft, replacement is the honest route. Call (903) 326-8963 and we’ll assess it on site and give you both numbers before you decide.
A single vanity cabinet swap in Dallas usually takes one day from demo to installed, assuming the plumbing stub-outs line up and the floor underneath is sound. If the subfloor is rotted or the supply lines need moving, add a second day. We write the schedule into the scope before work starts, so the timeline you’re handed is the timeline we work to.
We stock common hinge types, drawer slides, and mounting hardware on the truck, and we can often match a KraftMaid door or drawer front from our Dallas supplier network inside two to four weeks. OEM KraftMaid pieces run longer, and we’ll tell you the lead time up front. Call (903) 326-8963 for a free estimate, and we’ll come look at what you have.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
