Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tamko Kitchen Remodeling: The Dallas Owner’s Guide
A full Tamko kitchen remodel in Dallas typically runs $14,000 to $45,000 installed, depending on cabinet grade, countertop material, and whether you’re moving plumbing or electrical. We stock Tamko-compatible cabinet lines and coordinate countertop sourcing on a written quote before any work starts. Most homeowners call us because their existing kitchen has hit the point where patching one more drawer face or regluing one more delaminated cabinet box doesn’t make sense anymore.
Here’s the thing about kitchens that fail in Dallas specifically: the humidity swings between our wet springs and dry late summers do a number on particleboard cabinet boxes and laminate seams. If your Tamko cabinets are swelling at the base, if doors won’t stay aligned, or if the finish is peeling where you wipe down counters every day, you’re looking at a failed kitchen system, not a cosmetic touch-up. Curtis Lane has walked into enough Dallas kitchens to know the difference between a five-minute hinge adjustment and a cabinet run that’s done.
Our crews handle Tamko kitchen remodeling the same way we handle every job: straight number, real scope, no surprises on delivery day.
Which Tamko Models This Applies To
Tamko products span a wide range, and the kitchen remodeling work we do typically involves their cabinet lines, countertop surfaces, and occasionally the waterproofing membranes used under tile or stone. The compatibility question is less about a single model number and more about how the original kitchen was built: box dimensions, door hinge spacing, and whether the existing substrate can support new materials.
The gotcha we see in Dallas homes built from the 1980s through early 2000s: Tamko cabinetry of that era often used 3/4-inch particleboard boxes with 1/2-inch backs. Modern replacements use 3/4-inch plywood boxes or denser furniture-grade particleboard, and the difference matters when you’re hanging new uppers or adding a kitchen island. If the original wall blocking isn’t in the right place, we adjust the scope on paper before demolition starts – not after. That’s the Garrison Standard at work.
OEM versus aftermarket: for cabinet doors and drawer fronts, OEM matches the existing finish and reveals exactly. Quality aftermarket equivalents from KraftMaid or Wellborn often exceed the original construction at a lower installed cost, and we document the brand and spec in your written quote so there’s no ambiguity later. For countertops, the OEM conversation usually doesn’t apply – a Cambria or Silestone top replaces anything the original builder installed, usually with a better edge profile and stronger warranty.
Whenever we open a Tamko kitchen, we check the original installation against current code. Dallas requires GFCI protection within six feet of a sink, and a surprising number of older kitchens don’t have it. That’s the kind of thing that gets flagged on the estimate, priced in writing, and corrected as part of the scope.
Styles & brands we work with
Signs Your Tamko Kitchen Remodeling Is Failing
- Cabinet doors sag or won’t align. Hinge screws stripped out of particleboard boxes are the usual cause. Once the substrate around the hinge is chewed up, adjusting the hinge buys you weeks, not years.
- Drawer boxes wobble or stick. The drawer glides are worn or the box sides have started to separate. In Dallas, the repeated humidity cycles swell and shrink particleboard until the glue joints fail.
- Laminate or veneer peeling at edges. Water and steam from cooking find the seam, and once the core gets wet, it’s delaminating. This is especially common around dishwasher openings and sink bases.
- Backsplash grout cracking along the counter line. The counter has shifted or the original install used mastic instead of thinset. If you’re replacing counters anyway, this is the time to do the backsplash right.
- Countertop seams separating or staining. Older laminate or natural stone tops that weren’t sealed properly fail first at seams and around the sink cutout. A failed seam means water intrusion into the cabinet below.
None of these are cosmetic problems that a little caulk or a new coat of paint fixes permanently. They’re indicators the original installation has reached the end of its service life, and the longer you wait, the more likely a full cabinet replacement becomes necessary instead of a partial repair.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a Tamko kitchen remodel runs $14,000 to $45,000 installed. The spread depends on three things: how many linear feet of cabinetry you have, what countertop material you choose, and whether you’re moving plumbing fixtures or electrical points. A smaller galley kitchen with stock cabinets and a laminate top lands at the lower end. A full gut with custom cabinets, Cambria or Silestone counters, and structural changes lands at the upper end.
Our written quote includes demolition and disposal, cabinet and countertop installation, plumbing and electrical rough-in if needed, backsplash, and job-site cleanup. Every line item is priced before we start, and nothing moves at the door. The 365-Day Done Right Promise covers every part of that scope: if anything we installed fails within a full year, we come back and correct it at no charge.
The variables that move the number: moving a sink or range line, rewiring outlets, load-bearing wall work, and upgrading from standard to plywood cabinet boxes. We spell those out as separate line items so you can see exactly where your money goes.
DIY or Call Us?
You can do your own homework before calling: take measurements, look for a manufacturer label inside a drawer or under a shelf, and figure out whether your issue is one failing cabinet or a systemic problem. Those details help us give you a tighter estimate over the phone.
What you shouldn’t do is attempt cabinet removal or countertop replacement yourself, especially around plumbing and electrical cutouts. A wrong cut on a $4,000 countertop slab is an expensive mistake, and moving a gas line or wired outlet without a permit creates a hazard and a code violation. Dallas permitting and inspection requirements apply to any kitchen remodel that touches plumbing or electrical. We pull the permits, we schedule the inspections, and we don’t cover up work until it passes.
If you’re unsure whether your Tamko kitchen needs a repair or a full replacement, call us at (903) 326-8963. We’ll walk through what you’re seeing and give you a straight answer before we ever step foot in your house.
FAQs
A standard kitchen remodel in Dallas takes 4 to 8 weeks from demolition to final walkthrough, depending on scope and material lead times. Cabinetry from KraftMaid or Wellborn typically ships in 3 to 5 weeks, and solid surface counters are templated and cut within a week of cabinet install. We give you a written schedule as part of the estimate, and that schedule includes buffer days for inspections. Call (903) 326-8963 for a project timeline specific to your kitchen.
Hinges, drawer glides, and individual door fronts can be repaired or replaced if the cabinet boxes are still structurally sound. Once the box itself is swollen, separated, or water-damaged, repair is a short-term patch and replacement is the honest recommendation. We’ll tell you which situation you have before we quote anything.
We stock common cabinet hardware, hinge types, and drawer glide systems on our trucks, plus we work with KraftMaid, Wellborn, Cambria, and Silestone for doors, boxes, and countertops. Full cabinet runs and countertop slabs are ordered to your spec after measurement, not guessed at from a catalog. If your exact Tamko part is still available from the manufacturer, we’ll source it and document it in your quote.
No. We write the price, the scope, and the material specs into your contract before demolition begins, and the only way that number changes is if you add or upgrade scope in writing. That’s the Garrison Standard, and it’s why our Dallas clients don’t get surprise invoices at the end of a job. Call (903) 326-8963 and we’ll give you a free written estimate.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
