Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ECO Window Systems Fence Installation: The Dallas Owner’s Guide
ECO Window Systems fence installation in Dallas typically runs $3,500 to $9,000, depending on the fence’s material, linear footage, and whether the old posts and footings can be reused. We stock ECO-compatible aluminum fence panels and hardware on our trucks, which means most swaps we schedule in Dallas are measured, priced, and installed without a second trip to the supplier. Most owners discover the problem the same way: a gate that binds against the latch, a section that leans after a hard north wind, or powder coating that’s started to flake off at the post bases after a few Texas summers.
Bradford Remodeling Co Dallas is an independent service provider. We are not affiliated with ECO Window Systems, but we work with their fence systems regularly and keep the common hardware, post caps, and gate components matched to their specs.
Which ECO Window Systems Models This Applies To
ECO Window Systems manufactures window and door products, and their fence line shares the same aluminum extrusion profiles and powder-coat finish as their railing and screen enclosures. What you need to know before you call: the fence post size and gate hinge configuration vary between their standard residential line and their commercial-grade series. On residential installations across Dallas, we most often see 2-inch square posts with a 1.5-inch rail system. Measuring the post outside dimension with a tape rule is the fastest way to identify what you have.
For replacement parts, we recommend OEM ECO hardware for hinges, latches, and post caps. The factory tolerances are tighter, and aftermarket hinges we’ve tried in Dallas heat tend to develop play within a season. For panel sections and full fence runs, quality aftermarket aluminum that matches the ECO profile and finish code will hold up just as well and often comes in at a lower material cost. The finish code is printed on a small label on the inside face of most ECO posts near the base; bring us that code and we can match it exactly.
Styles & brands we work with
Signs Your ECO Window Systems Fence Installation Is Failing
- Posts leaning at the base. In Dallas’s clay-heavy soil, the freeze-thaw cycle doesn’t cause heaving the way it does up north, but clay expansion locks onto posts and works them loose over five to eight years. If the post wobbles in the footing, the footing isn’t deep enough or the concrete collar has cracked.
- Gate dragging or binding at the latch. Hinge bearings wear first on the latch side, which drops the gate corner enough to misalign with the strike plate. Catching this early usually means replacing hinges; ignoring it means replacing the gate frame.
- Powder coating flaking or chalking at the base. Dallas irrigation overspray hits the bottom six inches of fence posts constantly, and mineral deposits etch into the finish. Once the bare aluminum shows, corrosion spreads slowly but steadily at that contact point.
- Loose or missing screws at rail brackets. Aluminum expands and contracts through a Dallas summer-to-winter swing of 60-plus degrees. The original self-tapping screws walk themselves loose over a few years, especially on fence runs exposed to full west sun.
- Sections rattling in the wind. If the panel brackets no longer hold tension against the rails, the whole system works loose incrementally. This gets worse fast in the fall front that hits the northern Dallas suburbs every year.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For ECO Window Systems-compatible fence installation in Dallas, expect $3,500 to $9,000. The low end covers a short run, maybe 50 to 75 linear feet, reusing the existing footings where they’re sound, with standard 4-foot panel height. The high end covers longer runs, custom gate rebuilds, taller 6-foot commercial-gauge panels, or any section where we’re excavating and pouring new footings. Dallas clay doesn’t forgive a shallow footing, so we size them by the book.
Every job gets a written price before we start. That price includes removal and haul-off of the old sections, new posts and hardware where needed, panel installation, gate adjustment, and cleanup. We don’t charge extra for the little things that other crews treat as change orders: shimming a post, replacing a bracket, swapping a latch that won’t align. The 365-Day Done Right Promise covers the full installation for a year. If a post settles, a gate binds, or hardware fails because of our workmanship, we come back and correct it at no charge. That’s The Garrison Standard, in writing, on every job.
Line-item pricing looks like this on a typical Dallas install:
- Post replacement (each): $150 – $350, including footing repair
- Fence panel section (6 ft): $180 – $400, ECO-matched aluminum
- Gate hinge and latch kit: $120 – $300 installed
- Full removal and haul-off: $400 – $900 depending on fence length and dump fees
- New footings (per post): $80 – $200, dug and poured to code depth
DIY or Call Us?
You can safely check a few things yourself. Walk the fence line and mark every post that moves when you push on it with two fingers. Look at the screw heads at each bracket; if they’re backing out, a Phillips driver and thirty seconds will tighten most of them. But here’s where DIY goes wrong on this kind of fence: people re-set a post in the same shallow hole, backfill with loose clay, and expect it to hold. It won’t. Or they order aftermarket panels that don’t match the ECO rail profile and end up with gaps at the corners.
If the failure involves footings, gate geometry, or anything where the post has pulled out more than half an inch of plumb, have someone who does this for a living look at it. We’ll be straight about whether it’s a quick swap or a full re-set. Call (903) 326-8963 and we’ll tell you what we’d do and what it costs. No charge for the answer.
FAQs
The aluminum panels themselves will last 20 to 25 years in Dallas; what fails first is the post footings and the gate hardware, usually around year eight to twelve. That’s a soil and weather issue, not a panel issue. Call (903) 326-8963 if your posts are leaning but the panels still look fine; replacing footings is cheaper than replacing the whole fence.
Yes, if the post itself is straight and the concrete collar hasn’t cracked completely through. We can excavate, re-plumb the post, and pour a new footing without pulling the whole section. If the post is corroded at the soil line, replacement is the honest call. We’ll show you the post before we recommend anything.
Most panel-only replacements take one day, including removal and haul-off. Full runs with new footings take two to three days depending on length and whether the ground is workable, which matters in a wet Dallas spring.
We keep the common ECO-compatible parts stocked: post caps, hinges, latch kits, bracket hardware, and straight panel sections in the most common Dallas finish colors. Unusual colors or commercial-gauge panel runs get ordered and arrive in three to five days.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
