Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tremron Bathroom Remodeling: The Dallas Owner’s Guide
If your Tremron bathroom is showing water damage, cracked tile, a failing shower pan, or a vanity that’s delaminating, you’re looking at a full bathroom remodel in Dallas that typically runs $9,000 to $28,000 installed. That range covers everything from tearing out the old Tremron surfaces to new waterproofing, tile work, fixtures, and trim, with a written price before we touch a single tool. Most Dallas homeowners call us after they notice grout that won’t stay sealed, soft spots under the tile, or water staining on the ceiling below the bathroom.
Tremron bathrooms from the 1990s and early 2000s used a specific set of materials and installation methods that are now hitting the end of their service life all across North Texas. The thin-set mortar, the waterproofing layers behind the tile, and the original fixtures were never built to handle 30 years of Dallas’s hard water and humidity swings. Curtis Lane has pulled apart enough of these bathrooms to know exactly what’s back there, and what it takes to rebuild it so it holds.
Which Tremron Models This Applies To
Tremron’s bathroom lineup from that era covered a few distinct series, and the remodel scope differs depending on which one you have. The original builder-grade models, typically installed in Dallas tract homes and mid-range custom builds, used standard 4-1/4 inch wall tile over a thin mortar bed, with a prefabricated fiberglass pan. The upper-end Tremron series moved to larger format tile, semi-custom vanities, and occasionally a deck-mounted tub. If you look under the vanity sink or inside the access panel behind the tub, you’ll usually find a Tremron stamp or a model number on a small metal plate. That plate matters less than what’s behind the tile.
The real question is whether we can rebuild on the existing structure, or whether the subfloor and framing need replacement. In most Dallas bathrooms we’ve opened up, the substrate below the original Tremron shower floor is either water-damaged OSB or swollen particle board. You can’t just re-tile over that. We replace it with a proper cement board and a modern waterproofing membrane like Schluter Kerdi, which is the current standard for a shower that won’t fail. We don’t use OEM Tremron replacement parts, because Tremron’s original materials aren’t sold through any current channel we’d stand behind. We spec equivalent or better from manufacturers like Kohler for fixtures and any of the major tile manufacturers for surfaces, with every material named in your written quote.
Styles & brands we work with
Signs Your Tremron Bathroom Remodeling Is Failing
- Grout that keeps cracking or falling out. The original Tremron installations used unsanded grout in many wall joints. As the house settles through Dallas’s clay soil shifts, the grout gives way. Once water gets behind the tile, the failure is underway.
- Soft spots or deflection in the shower floor. A shower pan that flexes underfoot means the substrate below it is wet and losing structural integrity. This is the most common major issue we find in Tremron bathrooms, and it usually means a full pan replacement, not a patch.
- Water staining on the ceiling below the bathroom. This is the symptom that finally gets people to call. By the time you see the stain, the leak has been running for weeks or months. The fix is opening the floor from above, finding the failed seal, and rebuilding the affected area.
- Vanity doors that no longer close square, or bases that are swollen at the bottom. The original Tremron vanities were often particle-board core with a thermofoil finish. Once humidity from shower steam works its way into the edges, the material swells and the doors bind. You can’t repair that; you replace the vanity.
- Mold or mildew that returns days after you clean it. Persistent mold isn’t a cleaning problem. It’s a ventilation and moisture problem, usually caused by a failed exhaust fan installation or water trapped behind a surface. The remodel fixes the source, not just the symptom.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A full Tremron bathroom remodel in Dallas runs $9,000 to $28,000, depending on the size of the bathroom, the condition of the framing below, and the finishes you choose. A smaller hall bath with a fiberglass shower unit and a stock vanity lands at the lower end. A primary bath with a walk-in shower, custom tile, a double vanity, and new plumbing rough-ins lands at the upper end. If we find significant subfloor damage once the old Tremron tile comes up, that work is included in your written price before we start, because we either account for it in the original quote or document it as a change order that you approve in advance. The only surprise a remodel should have is how smooth it went.
Every quote includes demolition, haul-away, plumbing and electrical work, waterproofing, all materials, and the labor to finish it. You get a line-item breakdown before any work starts, under The Garrison Standard. If the work fails inside 365 days, we come back and make it right at no charge. That’s the Done Right Promise, and it’s in writing, handed to you at job close along with a clean site and a documented scope.
DIY or Call Us?
You can safely do the diagnostic work yourself: check for soft spots in the shower floor, look for water stains on the ceiling below, and inspect grout lines for cracks. What you shouldn’t do is start pulling tile or cutting into walls, because you’ll hit plumbing, electrical, or a load-bearing member behind the surface, and now you have a bigger problem than you started with. Water damage repair is not a weekend project, and the waterproofing layer is the single most critical part of a bathroom remodel in Dallas. If that membrane isn’t installed correctly, you’ll be redoing the job in five years. Call us at (903) 326-8963, and we’ll send a background-checked, uniformed technician to measure, inspect, and give you a written quote. No pressure, no numbers that move at the door.
FAQs
A properly rebuilt bathroom with modern waterproofing and materials should last 25 to 30 years or more in Dallas. The original Tremron installations typically made it 20 to 25 years, which is about what you’d expect from 1990s-era building science. Call (903) 326-8963 if you want us to assess what your bathroom is showing right now.
No, not reliably. Once the substrate below a Tremron shower pan is wet, patching the surface won’t stop the structural damage underneath. We replace the pan and the waterproofing layer beneath it, because that’s the only fix that holds up and is backed by our 365-Day Done Right Promise. For an exact quote, call (903) 326-8963.
We schedule most full bathroom remodels for 3 to 5 weeks from demo to final walkthrough, depending on the scope and whether we’re moving plumbing. Smaller replacements with a stock vanity and fiberglass shower can be done in about 2 weeks. We give you a start date and a finish date in your written quote, and we hold to them. Call (903) 326-8963 to get yours.
We don’t stock OEM Tremron parts, because the original materials are no longer available through any channel we consider reliable. What we do stock and install are equivalent or better materials from documented brands like Kohler, Moen, KraftMaid, Cambria, and Silestone, with manufacturer specs that back our own guarantee. Call (903) 326-8963 for a free estimate on your bathroom remodel.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
