Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mighty Buildings Driveway & Pavers: The Dallas Owner’s Guide
We replace, repair, and install driveway pavers for Mighty Buildings homes across Dallas, with most paver driveway replacements running $7,000 – $18,000 fully installed. We’re at your door within a day or two of your call, and we carry the most common paver sizes and patterns on the truck so we can price the job in one visit. Most owners discover a problem the way you probably just did: a paver that’s cracked under a wheel line, a low spot filling with water after a rain, or an edge row that’s started to drift into the lawn.
One thing to know upfront: Bradford Remodeling Co Dallas is an independent service provider. We’re not affiliated with Mighty Buildings, and we don’t pretend to be. What we do is understand how Mighty Buildings driveways are built – the substrate, the base depth, the edge restraints – and we match replacement pavers to your existing pattern with a straight written number before any work starts.
Which Mighty Buildings Models This Applies To
Mighty Buildings driveways, like most Texas residential hardscapes, are typically set on a compacted gravel base with sand bedding and a concrete or plastic edge restraint. The pavers themselves are usually a standard modular concrete paver – commonly a 60mm or 80mm thickness in a Holland, running bond, or herringbone pattern. What matters most for a correct match isn’t the home model name; it’s the paver manufacturer and color lot. Here’s the compatibility gotcha: concrete pavers fade and weather at different rates by color and batch. A paver you pull from an old pallet won’t match a five-year-old driveway, even if it’s the same SKU. We handle this by pulling a sample from your actual driveway, measuring it exactly (length, width, thickness, chamfer), and matching against current production lots before we commit to a number.
On the OEM versus aftermarket question: Mighty Buildings doesn’t manufacture pavers. They source from large commercial suppliers – often a Belgard, Unilock, or similar name-brand line, which we install and stock. That means a quality aftermarket equivalent is usually identical to what’s already in your driveway, not a downgrade. The key is matching the dimensions and the finish, not chasing a logo. We’ll show you the spec sheets and let you see the pavers before we order.
Styles & brands we work with
Signs Your Mighty Buildings Driveway & Pavers Is Failing
- Paver cracked under a vehicle wheel path. Dallas heat expands concrete pavers, and if the sand joints are blown out or the base was under-compacted, the pavers can’t move with the thermal cycle. The crack is a symptom – the real problem is usually below the surface.
- Water pooling in one area after rain. This almost always means a localized base settlement. Drainage in Dallas is flat and fast, so any paver area holding water for hours after a storm has lost its slope or its base support.
- Edge pavers drifting into the lawn or flower bed. The edge restraint has failed. Without a solid edge, the whole field literally walks outward under vehicle load and thermal expansion.
- Weeds or moss growing thick through the joints. Joint sand has washed out or was never replaced after a cleaning. Left alone, the pavers start shifting and chipping at the corners.
- Sunken spots near downspouts or irrigation lines. Water from a downspout or a leaking irrigation head erodes the base material under the pavers. The pavers themselves aren’t the issue – the base is washing away.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Dallas, a full paver driveway replacement runs $7,000 – $18,000. A repair job – replacing a failed section, re-compacting the base, re-setting the pavers, and re-sanding the joints – typically lands between $1,000 and $3,500 depending on square footage and how much base material needs to come out. A basic paver patio runs $3,500 – $11,000, and if the home sits on a concrete driveway and you’re comparing options, a full concrete replacement runs $4,500 – $12,000.
Every price we give is a written line-item number before work starts. You’ll see the material cost, the labor, the base and sand, and the disposal. There are no numbers that move at the door. The work carries our 365-Day Done Right Promise: if anything we install fails inside one year, we come back and correct it at no charge. Signed, written, in your hand at job close.
DIY or Call Us?
You can safely inspect a few things yourself: note where water pools, check whether any edge pavers have shifted, and clear debris from the joints so you can see if the sand is still in place. What you shouldn’t DIY is lifting and re-setting pavers over a failed base. It’s heavy work that looks simple and goes wrong in ways you can’t see without opening the base. The paver you re-set on a soft base will sink again in six months. And cutting pavers to fit edges without the right saw leaves jagged cuts and broken corners.
We’re glad to come out, look at what’s happening, and give you a straight written number to fix it right. Call (903) 326-8963 and a live person answers – not a voicemail queue.
FAQs
A properly installed paver driveway on a good base lasts 25 – 40 years in Dallas, but the sand joints need re-sanding every 3 – 5 years because our heat and heavy rain wash them out faster than in milder climates. The pavers themselves rarely fail before the base does. Call (903) 326-8963 and we’ll tell you honestly whether your driveway needs joints, sections, or a full re-set.
Yes, in most cases we cut out only the failed section, re-compact the base, and re-set matching pavers, which runs significantly less than a full replacement. The catch is color matching on older driveways – we’ll show you sample pavers next to your existing field before you commit to anything. Call (903) 326-8963 for a free on-site look.
A section repair usually takes one working day. A full paver driveway replacement on a standard Dallas residential lot takes two to three days, depending on base work and access. We’ll put the timeline in the written scope, and the site is clean and squared away before we leave.
We stock the common modular concrete paver sizes and colors on the truck, and we’ll pull from local Dallas supplier lots for anything non-standard. For brands like Belgard and Unilock – which Mighty Buildings driveways often use – we order from the same regional distributors the builders use, so the match is exact. Call (903) 326-8963 and we’ll check inventory while you’re on the phone.
Bradford Remodeling Co Dallas also works with KraftMaid, Cambria, and Silestone materials on the remodeling side, so we understand that a home’s systems – inside and out – have to work together. If your driveway is part of a larger Mighty Buildings exterior hardscape, we’ll look at the whole picture before we price the fix. Straight number, real scope, no surprises on delivery day.
Call (903) 326-8963 to schedule your free estimate. A live person answers, and you’ll get a written price before any work starts.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
