Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ActiveYards Windows & Doors: The Dallas Owner’s Guide
ActiveYards window and door replacement in Dallas typically runs $450 to $1,800 per unit installed, depending on whether we’re swapping hardware, glass, or an entire door slab. We carry ActiveYards-compatible rollers, hinges, handles, locks, weatherstripping, screens, and full-frame replacements on our service trucks, and most parts go in the same visit. Homeowners usually find us the day a sliding door jumps its track, a lock stops catching, or a window won’t stay open without a prop.
If you’re reading this with a screwdriver in one hand and a part number you found online, slow down for a minute. ActiveYards parts are not universal, even inside the same product family. We’ve corrected enough mismatched-roller jobs across Dallas to know that the wrong part creates a second problem instead of fixing the first. Curtis Lane and our crew match parts by the manufacturer label, not by eye.
Which ActiveYards Models This Applies To
ActiveYards builds windows and doors under several aluminum and vinyl lines, and the differences matter. The two most common families we service in Dallas are the aluminum-framed products, often found on homes built or renovated between roughly 2005 and 2018, and the newer vinyl series that replaced them. Within the aluminum line, roller housings changed at least twice, which means a roller from a 2010 door will not necessarily seat into a 2016 track without modification. We’ve seen that exact mismatch cause a door to ride high and chew the weatherstripping along the header.
Your best move is to find the silver or white manufacturer label, usually glued to the door edge, the top rail of a window sash, or inside the top track. That label carries the series code and size. If the label is gone, we measure the glass unit, the frame pocket, and the roller offset in the shop. That measurement work is part of the estimate, not an add-on charge. For most ActiveYards parts, we recommend OEM when the part is still in production, because the tolerances line up with what the factory intended. On discontinued hardware, we source aftermarket equivalents that we’ve tested for fit, not internet listings that claim to fit everything.
Styles & brands we work with
Signs Your ActiveYards Windows & Doors Is Failing
- Sliding door jerks or grinds when you open it. That’s almost always a dead roller bearing or a track packed with North Texas dust and pollen. The roller is a wear part. Leaving it under load with a bad bearing will oval the track and double the repair cost.
- Door handle turns but the latch won’t catch. The internal lock gear strips over years of use, especially on aluminum-frame doors. A replacement handle set is a fifteen-minute swap for us, but the original part number matters because ActiveYards changed the backset at least once.
- Window sash won’t stay in place when opened. The constant-force balance or block-and-tackle balance has broken. This safe, predictable failure is the number one window call we get in older Dallas subdivisions.
- Condensation or haze between the glass panes. The insulated glass unit seal has failed. You can’t reseal it. The glass unit gets replaced, and the frame usually stays.
- Draft through a closed door or window. The weatherstripping has compressed or torn, especially common after the Dallas freeze-thaw-freeze cycle swings we get most winters. Replacement weatherstripping is cheap; the labor is the bigger share of the bill.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
For ActiveYards windows and doors in the Dallas market, here’s what we quote and what the range covers:
- Roller or hinge replacement: $450 – $900 installed, including OEM or tested aftermarket parts, track cleaning, and alignment.
- Handle, lock, or latch set: $400 – $750 installed, part matched to your series label.
- Weatherstripping replacement: $350 – $650 per door or window, including adhesive removal and new seal bedding.
- Insulated glass unit replacement: $800 – $1,800 installed, sized from your existing frame, with new glazing and sealant.
- Full door slab or window sash replacement: $1,200 – $2,500 installed, including hardware transfer, shimming, and final adjustment.
Every quote is a written line-item price before work starts. No numbers move at the door. Our labor is insured and bonded, and the 365-Day Done Right Promise covers every install: if the part or our work fails inside the first year, we come back and correct it at no charge.
DIY or Call Us?
You can safely clean door tracks, tighten visible screws on handles, and inspect labels to identify your series. That’s all fair game and worth doing before you call, because a clean track tells us whether the roller actually failed or just got packed with debris. What we don’t recommend is prying out an old roller on a spring-loaded assembly without the right tool, or pulling an insulated glass unit from an aluminum frame without working the glazing bead in sequence. The glass, frame, and balance systems all carry tension and sharp edges. A wrong move turns a $600 repair into a $1,800 replacement.
If you want a straight number on what your ActiveYards windows or doors job costs in Dallas, call us at (903) 326-8963. We’ll match the part, price the labor, and put it in writing before we touch the first screw.
FAQs
Expect 10 to 20 years from the frame and hardware, but roller bearings, weatherstripping, and insulated glass seals typically need replacement at the 8 to 12 year mark in the Dallas climate. The heat and UV beat on seals harder here than the cold does, and dust accelerates roller wear. Call (903) 326-8963 for a free estimate, and we’ll tell you what’s actually worn before we quote anything.
Yes. In most cases, the frame stays in place, and we replace only the failed component: roller, hinge, handle, balance, weatherstripping, or glass unit. We replace the whole door or window only when the frame is damaged or the series is discontinued with no compatible hardware. Call (903) 326-8963 for a written quote on the repair versus replacement cost.
Most hardware and weatherstripping replacements take 30 to 90 minutes on site. Insulated glass unit replacements often take one to two weeks because the unit has to be fabricated to your frame’s exact size. We’ll give you the timeline in the written estimate, not a vague window.
We carry common rollers, hinges, handles, locks, and weatherstripping for ActiveYards aluminum and vinyl lines on our service trucks. Less common parts and custom glass units are ordered to spec and installed once they arrive. Call (903) 326-8963, and we’ll check our stock against your label number while you’re on the phone.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
