Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Ameristar Construction in Garland, TX | Bradford Remodeling Co Dallas
As a Garland General Contractor, our Ameristar construction service typically runs $9,000 to $45,000 depending on scope, and we complete most kitchen and bath remodels in four to eight weeks. We’re Bradford Remodeling Co Dallas, an independent contractor that’s been installing and servicing Ameristar HVAC alongside full remodels in Garland for over a decade. We know these systems and these houses. Call (903) 326-8963 for a written estimate on Ameristar equipment paired with any remodel scope.
Why Garland Residents Choose Us for Ameristar Service
We’ve pulled Ameristar condensers off tilted pads in Garland’s clay soil more times than we can count. That’s not a sales line, it’s a service record. Curtis Lane, our owner, started on a residential carpentry crew out of Los Angeles Trade-Technical College before running remodeling jobs across Dallas for nearly twenty years. What that means for you is simple: when we spec an Ameristar system for a Garland home, we account for the slab movement, the attic heat, and the ductwork that’s been sitting in your 1970s ceiling since before the unit was installed.
We’re not an Ameristar factory rep or an authorized dealer. Never have been. We’re an independent Ameristar sales & service contractor, which gives us the freedom to tell you when a repair beats a replacement and when a replacement is the smarter money. Our techs show up background-checked, in uniform, with the written scope in hand. That’s how Curtis runs the crew.
Styles & brands we work with
Common Ameristar Construction Problems We Solve in Garland
These are the calls we get most from Garland homeowners:
- Evaporator coil leaks on Silver Series splits. Garland’s humidity and attic heat soak wear down coils faster than you’d expect. A 2016 Silver Series in a Garland attic with ridge vents at code minimum will often leak before year eight. We replace with OEM coils when the unit’s under warranty; after that, we’ll quote you the honest repair-versus-replace number.
- Capacitor failures on Platinum Series heat pumps in August. When a 1970s slab home runs undersized ducts, the heat pump cycles harder and the capacitor takes the hit. We see this every summer in Garland, and we stock aftermarket capacitors on the truck to keep a sweltering house from waiting on a parts delivery.
- Condensate drain clogs on attic-installed package units. Blown-in insulation and seasonal construction dust clog the drain line, and a clogged line in a Garland attic means a ceiling stain by morning. We clear the line, then we fix the pitch so it drains like it should.
- Flame sensor fouling on 80% AFUE gas furnaces. Older Garland homes with oversized furnaces short-cycle through the winter, and a fouled flame sensor is the usual culprit. We clean or replace it, and we’ll tell you straight if the real problem is an oversized unit in an under-insulated house.
- Tilted condenser pads from clay soil movement. We’ve seen pads tilt nine degrees in two seasons. A compressor running out of level is a compressor on the way to an early grave. The fix starts two feet down, not at the pad.
Ameristar Service in Garland: What Local Conditions Mean for Your Equipment
In Garland’s older Duck Creek corridor, homes built on expansive clay often show the same diagonal cracks above windows on the south-facing walls. We know those cracks. When we set a new Ameristar condenser on a concrete pad next to one of those walls, we dig down two feet and install a compacted gravel base with a steel bracket anchored to the slab. Because a pad poured directly on the clay will tilt within two seasons and put the compressor out of level, and a tilted compressor vibrates, and vibration kills the bearings. That’s what nobody tells you when they drop a pad on the grass and walk away.
Last March we replaced a 14-year-old Ameristar Silver Series package unit on a 1970s pier-and-beam home near the Duck Creek corridor. The original unit sat on a cracked concrete pad tilted nine degrees from clay movement, causing the compressor to vibrate and the condensate pan to overflow into the hallway. Our crew pulled the old unit, set a new Ameristar 14 SEER heat pump on a steel platform bracketed to the existing beams, and rerouted the drain to daylight outside. The homeowner’s humidity levels dropped within a week, and the unit hasn’t cycled off long enough to freeze up since. Straight number, real scope, no surprises on delivery day.
Ameristar Models & Products We Service in Garland
Our crew works on the full Ameristar by American Standard line you’ll find in Garland homes:
- Silver Series – entry-level split systems, common in rental rehabs and first-time homeowner purchases
- Platinum Series – mid-efficiency heat pumps, the workhorse for 1,500 to 2,500 square-foot Garland homes
- Gas Furnaces – both 80% and 95% AFUE units, and we see plenty of each in Garland’s older housing stock
- Package Units – rooftop units on older Garland additions and mother-in-law suites, which have their own set of drainage and access habits
For parts, we use authentic Ameristar OEM components on coils, control boards, and motors, especially when the unit’s still under warranty. For out-of-warranty repairs, we’ll recommend quality aftermarket capacitors, contactors, and pressure switches when they keep the invoice down without compromising the system. We stock the common parts in our Dallas shop so Garland service calls don’t wait on freight.
See the difference
Before
After
Before
After
Before
AfterAmeristar Service Pricing in Garland
Here’s what our Kitchen Remodeling - Garland and other work generally runs, depending on scope:
| Service | Price Range |
|---|---|
| Roof Replacement | $8,000 – $20,000 |
| Full Kitchen Remodeling | $14,000 – $45,000 |
| Small Kitchen Remodel | $9,000 – $20,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
The spread comes down to square footage, ceiling height, whether we’re moving plumbing or keeping it put, and what the slab has done to the walls. A free estimate from us means a written number with line items, not a ballpark. Call (903) 326-8963 and we’ll walk the job in person.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Ameristar Construction in Garland
No. Manufacturer warranties cover defects in the equipment, not damage from installation conditions like a tilted pad or a moving foundation. That’s why we anchor our pads the way we do in Garland’s clay soil. If your compressor is dead from a pad that tilted, the repair comes out of your pocket, which is all the more reason to get the pad right the first time. Call (903) 326-8963 and we’ll inspect your setup before you spend a dollar on replacement.
Sometimes yes, sometimes no. If the lineset is the right diameter for the new unit, the insulation is intact, and there’s no kinking or corrosion from decades in a Garland attic, we’ll reuse it. If the old lineset was sized for an R-22 system and you’re moving to R-410A or a newer refrigerant, we replace it. We’ll tell you which one applies after we see it.
Short cycling in winter usually points to an oversized furnace or fouled flame sensor. Garland homes from the 1970s often had furnaces installed with more BTUs than the insulation justified. The unit heats the space fast, shuts down, then kicks on again. We clean the sensor first, then we look at whether the furnace is sized right for the house. Call (903) 326-8963 and we’ll diagnose it.
That’s usually a failing capacitor, a compressor drawing high amps, or a loose connection baking in the rooftop heat. Garland’s August roof temps can hit 150 degrees on a package unit, and that heat accelerates every electrical weakness. We check the start components first, then the compressor, then the wiring. The fix is often a capacitor and a tightened terminal, but we won’t know until we’re on the roof.
It depends on the duct condition. Slab-on-grade homes from the 1960s in Garland often have ductwork running through the foundation, and those ducts can be cracked, crushed, or full of years of construction debris. If the ducts are sound, a new Ameristar heat pump will work fine. If they’re not, you’re paying to condition the dirt under your slab. We inspect the ducts before we quote, so you’re not surprised later. Call (903) 326-8963 for a free assessment.
Service Areas Near Garland
We run crews from our Dallas shop into Garland, Ameristar service in Dallas, Ameristar service in Sunnyvale, and the surrounding Garland service area. If you’re within a half-hour drive, we’ll be there with the truck stocked and the scope written.
Book Your Ameristar Service in Garland Today
We’re on the phone 24/7, and a live person answers. Call (903) 326-8963, tell us what you’re seeing, and we’ll get a written estimate scheduled. Our 365-Day Done Right Promise covers every job. If the work doesn’t hold, we come back and make it right at no charge.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Garland since 2004.
