







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Barrette Driveway & Pavers: The Dallas Owner’s Guide
We install and repair Barrette-compatible pavers and driveway systems across Dallas, with most paver driveway installations running $7,000 – $18,000 depending on square footage, base condition, and paver line. If your Barrette pavers are shifting, cracking, or your edging has let go after a heavy Texas rain, we can usually diagnose it on the first visit and get the repair scoped the same day. What you’re seeing right now, heaving edges, sunken spots, weeds pushing through joints, tells us the substrate under the pavers failed before the pavers did.
Which Barrette Models This Applies To

Barrette Outdoor Living manufactures several paver and edging lines, and the compatibility question matters more than most homeowners realize. The most common products we see in Dallas are the Barrette Structural Paver Systems, their Perma-Edge paver restraints, and landscape border products that interface with concrete or paver driveways. Pavers themselves are largely dimensional, 60mm, 80mm, and occasionally 100mm thickness for driveway-rated traffic, but the real compatibility gotcha is the paver restraint and base system. A 60mm paver used as a driveway surface over a weak base will fail in two North Texas seasons. We check base depth, compaction, and restraint type before we ever order a single paver, because matching the paver to the Barrette line doesn’t matter if the substrate is wrong for Dallas clay soil.
OEM versus aftermarket: Barrette pavers are concrete units. Once the original lot is discontinued, which happens regularly, a quality concrete paver from a local Dallas supplier will perform identically if the dimensions and compressive strength match. We do not chase “OEM or nothing” on pavers. We chase dimensional match, color consistency, and a base spec that holds. On edging and restraints, we do prefer the Barrette Perma-Edge system when the original install used it, because the spike pattern and profile are specific, and a mismatched restraint is the number one cause of paver spread on Dallas driveways.
Styles & brands we work with







Signs Your Barrette Driveway & Pavers Is Failing
- Edges are spreading or bowing outward. This means the paver restraint, likely Barrette Perma-Edge or a spike-style edge, has pulled loose from the base. Dallas clay expands and contracts, and over three to five years that movement works spikes out of the ground.
- Sunken or rutted wheel tracks. The base rock under the driveway was not compacted in lifts, or it was never deep enough for driveway traffic. Pavers themselves rarely fail; the base under them does.
- Weeds or ant colonies erupting through joints. Joint sand has washed out, usually after heavy Dallas spring storms. Ants love washed-out paver joints, and they excavate the bedding sand, which accelerates settling.
- Pavers rocking or cracking underfoot. A rocking paver means the bedding layer is no longer uniform. The crack is the paver finally giving up under point load. Barrette pavers have solid compressive strength, but they cannot bridge a void.
- Water pooling in the center of the driveway. The original install did not account for drainage, or the grade has shifted. Standing water on pavers in Dallas freezes rarely, but it softens the base and invites the settling problems above.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included

For Barrette-style paver driveway work in Dallas, plan on these ranges:
- Full paver driveway installation (new base): $7,000 – $18,000 depending on driveway size, base depth, paver thickness, and access to the site.
- Driveway replacement (tear-out, new base, new pavers): $5,000 – $14,000. Tear-out adds labor and haul-off, so on a mid-size Dallas driveway you’re usually in the $8,000 – $11,000 range.
- Paver patio installation: $3,500 – $11,000. Patio pavers can often be 60mm instead of 80mm traffic-rated units, which brings material cost down.
- Edge restraint repair or replacement: This is usually part of a larger repair scope, not a standalone, but expect $400 – $1,200 in labor and restraint material if we’re addressing a section of failing edge.
Every Bradford Remodeling Co Dallas paver job includes a written price before any work starts, so the number we give you is the number on the invoice. That price covers tear-out when needed, base excavation and compaction, geotextile fabric where the soil calls for it, the pavers themselves, joint sand, edge restraints, and clean-up. No numbers move at the door. Every completed job carries the 365-Day Done Right Promise: if the pavers shift, crack, or the edge lets go within one year, we return and correct it at no charge. That guarantee is in writing, in your hand, at close.
DIY or Call Us?
You can safely inspect your own paver driveway. Walk the edges, look for spike heads popping up on the restraints, check whether joints are full of sand or hollow, and note where water sits after the next Dallas thunderstorm. That information helps us scope the job faster. What you should not do is attempt to re-level a traffic-rated paver section by lifting pavers and adding sand in a weekend. The failure is almost always in the base, not the bedding layer, and adding sand on top of an uncompacted base gives you three months of smooth driveway before it settles again. Paver work is not dangerous in the way a garage spring is, but it is heavy, repetitive, and unforgiving if the base depth is wrong. Call us at (903) 326-8963 and we’ll give you a straight number on what the repair actually needs.
FAQs

With a properly compacted base and intact edge restraints, concrete pavers on a Dallas driveway should last 25 to 40 years before the units themselves degrade, but the base and edge system usually need attention within 7 to 12 years because of Dallas clay movement and drainage. The pavers often outlast the install method.
Yes, if the base under the failed section is still sound, we can pull the affected pavers, re-grade and compact the base, and re-set the same units, but if the base has failed across a larger area, patching will leave a visible height difference and the patch will fail again. Call (903) 326-8963 and we’ll tell you honestly which situation you have.
A section repair typically takes one to two days, and a full driveway replacement with new base runs three to five working days depending on access, weather, and whether we’re hauling off the old material. We schedule the job when we say we will, and the written price includes the schedule.
We do not stock full pallets of Barrette pavers on the truck because paver color, thickness, and profile vary by project, but we source Barrette-compatible units and the Perma-Edge restraint system through Dallas suppliers we work with regularly, alongside other documented brands like Belgard and Unilock. We can usually have the right material on site within a few days.
If you’re looking at a paver driveway that’s shifting, spreading, or pooling water in Dallas, call Bradford Remodeling Co Dallas at (903) 326-8963 for a free estimate. Curtis Lane has run crews across Dallas for the better part of two decades, and he’ll tell you what the base actually needs before he tells you what it costs. Straight number, real scope, no surprises on delivery day.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.


