Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
GAF Fence Installation: The Dallas Owner’s Guide
GAF fence installation in Dallas typically runs $3,500 to $9,000, and we keep the parts and crews on hand to turn most jobs around within a week of your written estimate. The more common call starts with a section of fence that’s leaning, pulling away from the post, or showing rot at the base where it meets the Dallas clay soil. You’ve got a GAF product, you need it installed correctly, and you want the price in writing before anyone digs a hole.
Most Dallas homeowners discover the failure after a hard rain or a stretch of July heat. The post shifts, the pickets separate, or the gate starts dragging. What started as a cosmetic issue turns into a structural one because water got into the post hole and the soil moved. We handle the full install from removal to concrete set to cleanup.
Key Takeaways:
- Installed price in Dallas: $3,500 – $9,000 depending on linear feet, gate count, and soil conditions
- Written price before any work starts, every time
- 365-Day Done Right Promise covers the full install
- We stock GAF-compatible fence materials and match existing lines
Which GAF Models This Applies To
GAF’s fence line runs through several profile families, and the install requirements differ depending on which one you have. The most common in Dallas are the GAF composite privacy panels and the semi-private picket style, both of which use a routed post system rather than face-mounted brackets. That matters because a post installed 3/4-inch off plumb will show the error at the top of a 6-foot panel. The panel won’t seat correctly, and you’ll fight the gate alignment from day one.
The compatibility gotcha: GAF fence posts come in different wall thicknesses depending on whether they’re corner posts, line posts, or gate posts. A corner post takes more lateral load, and swapping in a line post there will fail early, usually at the first strong wind. We verify the post spec against the GAF product label before we set anything. If the label is gone or unreadable, we measure the post interior and match it to the correct gauge.
On OEM versus aftermarket: for GAF fence panels, we recommend genuine GAF panels when matching an existing run. The color and grain pattern differ enough between manufacturers that a patch job with a lookalike panel will be visible from the street. For posts and concrete, we use commercial-grade equivalents that meet or exceed GAF’s spec, because the failure point in Dallas is almost always the post-base connection, not the panel itself.
Bradford Remodeling Co Dallas is an independent service provider. We’re not affiliated with GAF. We do work with GAF products daily, and we also handle parts and installs for KraftMaid, Cambria, and Silestone lines for our remodeling clients.
Styles & brands we work with
Signs Your GAF Fence Installation Is Failing
- Post lean at the base: The post is moving inside the concrete footing or the footing itself is shifting. In Dallas, the expanding clay soil exerts enough pressure to push a shallow footing out of line within two seasons. A 24-inch footing holds; an 18-inch one fails.
- Gate drag or latch misalignment: The gate post has moved, often because the hinge side wasn’t set deep enough or the concrete was poured too wet and shrank as it cured. The gate still looks fine, but it’s grinding against the latch plate.
- Pickets separating from the rail: Fastener pullout on GAF panels means the rail pocket was over-drilled or the wrong fastener length was used. Water gets into the pocket, the fastener loses grip, and the picket starts to rattle.
- Bottom rail rot or discoloration: This is a drainage problem. If the panel sits too low or the grade slopes toward the fence line, water pools at the base. In Dallas, with our heavy spring rains followed by 100-degree days, the cycle of soak and bake breaks down the rail fast.
- Concrete footing cracking at the surface: A hairline crack isn’t panic. A crack that widens to a quarter-inch and runs the full surface means the footing is being torqued by soil movement. The fix is a deeper set, not more concrete on top.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
GAF fence installation in Dallas runs $3,500 to $9,000 for a standard residential run. The range is driven by four things: linear feet, number of gates, access to the work area, and what the soil does when we dig. A 100-foot run with one gate on flat ground in Richardson is a different job than 200 feet with two gates on a sloped lot in East Dallas with roots running the whole line.
| Line Item | Typical Cost Range |
|---|---|
| GAF panel materials (per linear foot) | $18 – $32 |
| Post and concrete set (per post) | $90 – $160 |
| Gate fabrication and hang (per gate) | $450 – $1,100 |
| Removal and haul-off of old fence | $500 – $1,200 |
| Full install labor | $1,800 – $4,200 |
Every line is written down before we start. No numbers that move at the door. The 365-Day Done Right Promise covers the full installation: if the fence fails inside a year because of our workmanship, we come back and fix it at no charge. Not a prorated credit. Not a service fee. We come back, we make it right, and we put that in writing when you sign.
DIY or Call Us?
An owner can check a few things safely: look for posts that have shifted out of plumb, check whether the gate still lines up with the latch, and clear debris from the bottom rail so water doesn’t sit against the panel. That’s where it ends. Digging post holes and setting concrete in Dallas clay is not a weekend job, and a 6-foot GAF panel catches real wind. If you set a post wrong and the panel fails, you’re redoing the whole section and buying new materials.
If the failure is more than one post or involves a gate, call us. Curtis Lane has been running crews in Dallas for the better part of two decades, including the kind of soil work where you learn fast that a post set with a bag of quick-mix from the hardware store doesn’t hold through a Texas summer. Straight number, real scope, no surprises on delivery day. Call (903) 326-8963 and we’ll get you a written estimate.
FAQs
A correctly installed GAF fence in Dallas lasts 20 to 25 years, with the post-to-footing connection being the first thing to watch. Our 365-Day Done Right Promise covers the work for a full year, and the manufacturer’s warranty covers the panels. Call (903) 326-8963 to get a written estimate for your property.
Yes, if the failure is isolated to one or two posts or a single panel section, we can usually repair it without touching the rest of the run. The repair costs less than a full replacement, but we’ll tell you honestly if the post spacing or panel condition means you’re better off replacing. Call (903) 326-8963 and we’ll walk the fence line with you.
Most residential GAF fence installations in Dallas take two to four working days from dig to final gate adjustment, assuming the weather cooperates and the existing fence is coming out clean. We lock the schedule when you sign the written estimate. Call (903) 326-8963 for a timeline on your specific job.
We stock GAF-compatible posts, fasteners, and common panel profiles on the truck, and we order full panel runs from our Dallas supplier ahead of your install date so everything is on site the day we start. The 365-Day Done Right Promise means we’re not rushing parts from a big-box shelf. Call (903) 326-8963 and we’ll confirm availability for your GAF product line.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
