Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Home Additions & ADU: The Dallas Owner’s Guide
If you’re planning a home addition or ADU in Dallas and want KraftMaid cabinetry specified throughout, the installed project typically runs $45,000 – $130,000 for a room addition, and $90,000 – $220,000 for a full ADU build. Bradford Remodeling Co Dallas stocks and installs KraftMaid-compatible materials on every addition we frame, and we typically begin rough-in cabinet measurements within two weeks of contract sign. Most Dallas homeowners discover they need us when their existing layout has outgrown the kitchen footprint, or when they’re staring at a garage that’s doing nothing but holding boxes.
A quick note before we dig into models and compatibility: Bradford Remodeling Co Dallas is an independent contractor. We’re not affiliated with KraftMaid directly. We specify their product because the cabinet boxes arrive square and the finish holds up in Texas heat, which is more than we can say for half the off-brands we’ve pulled out of Dallas homes.
Which KraftMaid Models This Applies To
We install KraftMaid across all three of their current lines: Vantage, Venecia, and Durham. Vantage is the workhorse for Dallas additions where budget and lead time matter. Venecia gives you the full-overlay, furniture-grade look without jumping to custom pricing. Durham is the top of the line, and we see it most in ADU kitchens where owners want a spec’d-out second unit that rents or resells well.
The compatibility gotcha with KraftMaid on an addition or ADU is the wall cabinet depth. Standard uppers ship 12 inches deep. In a Dallas addition where you’re furring out exterior walls for R-13 or R-15 insulation, that depth shrinks your usable clearance if the designer didn’t account for it. We measure rough openings against KraftMaid’s spec sheets before drywall ever goes up, because ordering 15-inch-deep uppers after the fact adds 2 to 3 weeks to the cabinet lead time. That’s a spec detail most remodelers catch too late.
OEM KraftMaid parts, meaning doors, drawer fronts, and trim pieces ordered directly through the KraftMaid dealer channel, carry the full manufacturer warranty and match your original finish code with zero variation. Quality aftermarket equivalents for hardware like pulls, soft-close slides, and hinges are functionally identical and often ship same-week. The dividing line is finish-matched components. Never accept an aftermarket door or drawer front on a KraftMaid run; the tint will be off under warm Dallas afternoon light, and you’ll see it every time you walk into the room.
We also stock and install Cambria and Silestone surfaces alongside KraftMaid cabinetry, and spec Kohler sinks and fixtures in ADU kitchens and baths.
Styles & brands we work with
Signs Your KraftMaid Home Additions & ADU Is Failing
- Doors that no longer stay closed or aligned. This usually means the hinges have loosened from repeated thermal cycling. Dallas summers push attic temperatures past 140°F, and wood door fronts expand and contract more than most homeowners realize. If you’ve re-tightened the same hinge twice in a season, the screw holes are wallowed out and need re-bored and doweled.
- Drawer boxes that stick or drag on the slide. KraftMaid uses undermount soft-close slides on most current lines. When dust from a Dallas addition’s drywall phase gets into the slide mechanism, or when the box gets loaded past its 75-pound rating, the ball bearings start to flat-spot. That’s a slide replacement, not a box replacement.
- Melamine edge banding peeling on shelving or drawer interiors. This shows up first in non-conditioned spaces like a converted garage in Dallas where humidity swings are wider. The adhesive KraftMaid uses gives way after enough moisture exposure. Regluing the banding is a one-visit fix if you catch it before the substrate swells.
- Finish checking or hairlines in the door fronts. On a KraftMaid addition installed near west-facing Dallas windows, constant sun load will eventually stress any wood finish. KraftMaid’s warranty covers finish defects from manufacturing. Checking from environmental exposure is not a manufacturing defect. We can replace the affected door fronts and re-spec a thermal film on the glass to slow it down.
- Upper cabinets pulling away from the wall. This is the one that matters. If you see a gap between the cabinet back and the drywall, the cabinet was likely hung with anchors instead of driven into studs, or the blocking behind the drywall was undersized. On an addition, this is a structural fix, not a cabinet fix. It requires re-securing into proper blocking before anyone hangs a plate or a glass stack on those shelves.
Replacement Cost & What’s Included
On a Dallas home addition where KraftMaid cabinetry is part of the scope, the full project lands between $45,000 and $130,000. On an ADU, you’re looking at $90,000 to $220,000 all-in. Since this page is about a parts-and-planning scenario rather than a garage door spring, the pricing guidance that matters is the cabinet portion: cabinet installation across a KraftMaid kitchen or ADU kitchenette in Dallas runs $4,000 – $13,000 depending on box count, island presence, and how much crown and trim the design calls for.
What drives the range on an addition here in Dallas is slab versus pier-and-beam, foundation depth, whether the new roofline ties into the existing run or gets its own cricket, and how much of the mechanical work (HVAC, electrical, plumbing for an ADU bath) is new versus extended from the main house. Every Bradford Remodeling Co Dallas project gets a written line-item price before work starts. The price you sign is the price you pay. No numbers move at the door.
Every cabinet we install is backed by our 365-Day Done Right Promise. If a door binds, a drawer sticks, or a hinge fails within a year of completion, we come back and correct it at no charge. In writing, signed, in your hand at job close.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
Home additions and ADUs are not a DIY part replacement. They’re a permitted structural build. If you’re here because an existing KraftMaid cabinet is failing inside a Dallas home you already own, here’s the honest split. You can safely check hinge tightness, confirm the doors are square with a level, and look for the gap between cabinet back and wall. You should not attempt to re-secure uppers, re-hang doors, or pull drawer slides on a loaded cabinet. The tools and know-how are one thing. The hospital bill from a falling wall cabinet is another.
For a KraftMaid cabinetry evaluation in Dallas, call (903) 326-8963. We’ll tell you over the phone whether it sounds like a slide replacement or a re-hang, and we’ll give you a written price before we come out. No surprise fee for the visit, no pressure to add scope.
FAQs
KraftMaid boxes and doors will typically hold for 20 to 30 years in a climate-controlled Dallas home, with hardware like soft-close slides and hinges needing replacement somewhere in the 10- to 15-year range. Texas heat shortens the life of finish and adhesives faster than KraftMaid’s Midwest test conditions. Call (903) 326-8963 and we’ll help you figure out whether you’re looking at a drawer slide or a full cabinet run.
Yes, hinges, slides, edge banding, and door alignment are all repairable on KraftMaid cabinets without replacing the box. The box itself is rarely the failure point. Call (903) 326-8963 for an exact assessment; we’ll quote the repair honestly and won’t sell a replacement where a repair does the job.
A standard slide or hinge replacement takes under two hours on site. Replacing door fronts requires ordering through KraftMaid’s parts channel and typically takes 2 to 3 weeks once we place the order. We’ll get you a written timeline along with the written price.
We stock common soft-close slides, concealed hinges, and drawer pulls in standard KraftMaid finishes, which covers most single-cabinet failures in one visit. Finish-matched doors and drawer fronts are ordered direct from KraftMaid by component number. Call (903) 326-8963 with your cabinet location and we’ll tell you what we can address same-visit.
Get a Straight Number on Your Dallas Addition or ADU
If you’re planning a home addition or ADU in Dallas and want KraftMaid cabinetry specified from day one, call Curtis Lane and the team at Bradford Remodeling Co Dallas at (903) 326-8963. We run the numbers honestly, put every spec in writing, and stand behind the work for a full year under the 365-Day Done Right Promise. Straight number, real scope, no surprises on delivery day.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
