Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
KraftMaid Kitchen Remodeling: The Dallas Owner’s Guide
Bradford Remodeling Co Dallas remodels kitchens built on KraftMaid cabinetry, and a full KraftMaid kitchen remodel in Dallas typically runs $14,000 to $45,000 installed. That includes cabinet work, countertops, hardware, and the labor to square everything away under The Garrison Standard. Most Dallas homeowners call us when cabinet boxes have sagged, drawer glides have gone stiff, or a hinge has stripped out of the face frame and left a door hanging crooked.
What usually happens is this: the kitchen worked fine for years, then one drawer stopped closing, then a door started rubbing, and now the whole run looks tired. You don’t need a brand-new kitchen. You need a crew that knows KraftMaid’s frame construction, hinge bore spacing, and finish codes well enough to bring the existing layout back to square, or replace what’s truly worn out without tearing out what still works.
We’re an independent Dallas contractor, not affiliated with KraftMaid. We install and work on KraftMaid cabinetry because it’s a documented brand we carry in our materials roster, alongside Cambria, Silestone, and Kohler for the surfaces and fixtures that finish the job.
Which KraftMaid Models This Applies To
KraftMaid builds in two main construction families over the years: framed cabinetry with a face frame on the front of the box, and their newer frameless or “full-access” lines where the door mounts directly to the box sides. The difference matters when a hinge has failed, because the mounting plate bore and hinge cup depth are not interchangeable between the two. On a framed box, the hinge plate screws into the face frame. On a frameless line, it screws into the interior panel. Guessing wrong means a door that hangs proud by an eighth of an inch.
To identify what you have, look inside any cabinet door for a KraftMaid stamp, often on the hinge-side interior or on an interior drawer box label. If the sticker is gone, measure the door overlay: framed KraftMaid doors typically overlay the opening by 1/2 inch, while full-access lines overlay closer to 1-1/4 inches. We carry OEM KraftMaid hinge and glide replacements on the truck when availability allows, and we’ll tell you straight when a quality aftermarket equivalent from Blum or Salice matches the bore pattern and load rating without compromise. In Dallas, the enemy is heat and humidity swing, which warps MDF door panels faster than solid wood over a 10-year stretch.
Styles & brands we work with
Signs Your KraftMaid Kitchen Needs Attention
- Drawer front sags or scrapes the cabinet below. The nylon roller or ball-bearing glide has worn past its tolerance. KraftMaid drawer boxes ride on side-mount glides in most framed lines; once the ball retainer clips break, the drawer rides metal on metal and chews itself up.
- Hinge screw holes have stripped and the door drops. Face frames on older KraftMaid runs are solid hardwood, but repeated hinge stress near a heavy door can wallow the screw bore. The fix is a proper dowel-and-re-drill, not a longer screw that splits the frame.
- Doors won’t stay adjusted. The hinge’s eccentric cam has worn smooth. If you adjust and it drifts within a week, the hinge body itself is done, not the adjustment range.
- Finish shows wear on the sink base first. In Dallas kitchens, sink base cabinets take water splash and under-sink humidity constantly. KraftMaid’s older thermoform doors delaminate at the bottom rail first. That’s a door replacement decision, not a full kitchen decision.
- Upper cabinets have pulled away from the wall. Thirty-year-old installations sometimes used screws without proper blocking into studs. Fresh blocking, longer fasteners, and re-shimming bring the run back level.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
A targeted KraftMaid repair or refit runs the lower end of the kitchen remodel range for Dallas, while a full kitchen rebuild with new cabinetry, counters, and plumbing touches the upper end. The $14,000 to $45,000 spread reflects what you’re actually asking for:
| Scope of Work | Typical Dallas Installed Range |
|---|---|
| Cabinet refit: new doors, glides, hinges on existing boxes | $4,000 – $13,000 |
| Full KraftMaid cabinet replacement with install | $9,000 – $20,000 (small kitchen) / $14,000 – $45,000 (full remodel with counters and fixtures) |
| Countertop replacement (Cambria, Silestone) | $2,000 – $6,500 |
| Backsplash install | $800 – $2,500 |
What drives cost: number of cabinet boxes, door count, hinge and glide replacement volume, island work, and whether the countertop has to come off to reset base cabinets. Every Bradford Remodeling Co Dallas estimate is a written line-item price before any work starts. No numbers move at the door. Our 365-Day Done Right Promise covers the installation for a full year in writing, and KraftMaid materials carry their own manufacturer warranty on top of that.
DIY or Call Us?
You can safely check the obvious: close each door and watch the reveal gap, tug each drawer to feel the glide catch, and look for water stains under the sink base. That tells you the scope. What you shouldn’t do is hang heavy doors on stripped frame bores with a longer screw, or force a misaligned glide back into a box that’s out of square. That’s where a $40 hinge job becomes a $400 face frame repair.
If you want a straight number on what’s actually wrong, call (903) 326-8963. We’ll look at the cabinet, tell you what failed and why, and write the price down before we touch a tool. Straight number, real scope, no surprises on delivery day.
FAQs
Boxes built with plywood sides and solid hardwood face frames routinely run 25 to 30 years in a Dallas kitchen, assuming they were installed level and the home’s humidity swing stays controlled. Door surfaces, especially thermoform on MDF, tend to show wear at 10 to 15 years near sinks and dishwashers. Call (903) 326-8963 and we’ll tell you if what you’re seeing is age or installation.
Worn glides and hinge bodies are replacement items, full stop. What can be repaired is the mounting point around them. If the frame is solid, a proper dowel-and-re-drill gives you a mounting surface as good as new. Call (903) 326-8963 for an exact assessment, free estimate included.
A targeted cabinet refit with new doors, hinges, and glides runs 3 to 5 working days. A full kitchen remodel with countertops and backsplash typically runs 4 to 8 weeks depending on material lead times and scope. We give you the schedule in writing with your estimate.
We keep common KraftMaid hinge bodies, glides, and touch-up materials on the truck for the most frequent failures we see across Dallas kitchens. If a part has to be ordered, we tell you the lead time before work begins, not after we’ve opened the wall. Call (903) 326-8963 and we’ll confirm what’s in stock.
Written by Curtis Lane, Owner, Bradford Remodeling Co Dallas at Bradford Remodeling Co Dallas, serving Dallas and nearby areas.
