Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Tremron Construction
Tremron pavers and retaining wall block show up all over Dallas, from Preston Hollow driveways to Lakewood patios, and we’ve been installing and repairing them for the better part of two decades. We’re an independent Dallas Tremron service provider, not a manufacturer-authorized dealer, which means we call problems like we see them and fix them with factory-fresh Tremron units when the match matters. If you need a Tremron patio reset, a driveway border rebuilt, or a leaning retaining wall corrected, call (903) 326-8963 for a written estimate before any work starts.
Dallas presents a particular set of conditions for any paver product. Our clay soil shrinks and swells with every drought and downpour cycle. Summer heat bakes surface sealers. Sprinkler overspray leaves mineral deposits on paver faces. We know which Tremron lines hold up under those conditions and which ones need more base prep than the average install. That knowledge comes from running crews across Dallas neighborhoods for nearly twenty years, not from reading a product catalog.
And the honest truth is this: most Tremron failures we see in Dallas aren’t product failures. They’re base failures, edge restraint failures, and drainage failures. Fix the foundation under the paver and the paver holds. That’s the discipline we bring to every Tremron job.
Why Trust Bradford Remodeling Co Dallas for Your Tremron Construction?
Curtis Lane, the General Contractor and owner of Bradford Remodeling Co Dallas, started in residential carpentry at Los Angeles Trade-Technical College and has spent the years since running crews across Dallas, including a stretch of kitchen and bathroom gut-jobs in Lakewood that taught him exactly how much 1950s-era plaster can slow a schedule. That same methodical approach carries into hardscape work. Before any Tremron unit gets set, we check what’s underneath it. Substrate depth, compaction, drainage pitch, edge restraint. If the base is wrong, the prettiest paver on the market will fail inside two years in Dallas clay.
Our crews are background-checked and uniformed, so you know exactly who’s walking onto your property. Every Tremron project gets a written price before work starts, including line items for base material, geotextile, sand, and labor. No numbers that move at the door. And every completed job carries our 365-Day Done Right Promise: if the work fails within a year, we come back and correct it at no charge. That’s The Garrison Standard, and it’s been the operating rule at Bradford Remodeling Co Dallas since 2004.
We also answer the phone with a live person, 24/7. Not a voicemail tree. A real human who can schedule your estimate.
Styles & brands we work with
Common Tremron Construction Problems We Fix in Dallas
- Efflorescence on Tremron Mega Olde Towne pavers. That white, chalky film isn’t a defect. It’s mineral salt wicking up through the paver’s pores, driven by water. In Dallas we see it most often where sprinkler overspray hits the same section of patio every morning. The fix is usually an efflorescence cleaner and a conversation about adjusting spray heads. If the pavers have been saturated for years, we may recommend a breathable sealer after cleaning.
- Edge restraints failing on Tremron Catalina paver driveways. Border pavers drift outward when the plastic or aluminum edging wasn’t spiked deep enough or the base wasn’t compacted to the edge. Once the restraint lets go, the whole perimeter starts to move. We pull the border units, re-set the restraint on a compacted ledge, and re-lay the pavers. On driveways we typically recommend concrete edging rather than plastic, because vehicle weight demands more than a spike in sand.
- Sand joint washout on Tremron pool decks. Frequent hosing, pool splash-out, and drainage issues flush the joint sand right out of a paver deck. Once the joints go empty, the pavers start shifting, and you get lippage at the edges. We re-sand with polymeric sand where drainage allows, and we check the deck’s pitch so water isn’t pooling against the coping.
- Tremron Stonegate retaining wall blocks tipping forward. This is almost always a backfill problem. When the zone behind the wall wasn’t compacted in lifts, hydrostatic pressure builds and the blocks rotate forward over time. Some walls can be pulled apart and rebuilt with proper drainage gravel and geogrid. Others have moved too far and need a full rebuild. We’ll tell you which, and we’ll put the price in writing either way.
- Tremron Bullnose coping units loosening around pool edges. Coping takes direct sun, pool chemical splash, and foot traffic. When the mortar bed underneath fails, individual units start to rock. Left alone, that creates a trip hazard and lets water into the bond beam. We reset the units on a clean, properly-sloped bed and re-mortar the joints with a pool-rated product.
Tremron Parts & Our Repair-vs-Replace Approach
For any Tremron repair where color or finish matching matters, we use factory-fresh Tremron units. Paver colors weather and fade in Dallas sun, so a ten-year-old installed paver won’t match a brand-new unit straight off the pallet, even from the same product line. That’s why we keep a local stock of older-run Tremron pavers we’ve salvaged from past jobs. When we can pull a closer match from inventory, we will.
Here’s our honest rule on repair versus replace: if a Tremron section has sunk more than an inch, or the edge restraints are broken, we usually recommend full base re-compaction rather than resetting individual pavers. Resetting a few units on a failed base just buys you six months. The base is the job. The pavers are the finish.
If you want an exact price for your Tremron repair, call (903) 326-8963. Estimates are free and you’ll get a written line-item number, not a ballpark that drifts after we start digging.
Our Tremron Service Process – Step by Step
- 1
Diagnosis. We pull up a section of pavers and inspect the base depth, compaction, drainage, and edge restraint. In Dallas, we’re checking specifically for clay soil movement, root intrusion, and sprinkler overspray. We measure, document, and photograph everything so you see exactly what we see.
- 2
Scope and written price. You get a line-item estimate before any work starts. Base material, geotextile, sand, replacement pavers, labor, disposal. Firm number. This is the no-surprises part of The Garrison Standard, and it’s non-negotiable.
- 3
Base rebuild or repair. For sunken sections, we excavate, compact the subgrade, install geotextile, and build the base in lifts with crushed concrete or road base, depending on the application. A Tremron driveway in DFW clay needs a deeper, more carefully compacted base than a walkway. We build to the load, not to a generic spec.
- 4
Pavers reset and joints filled. We re-lay the Tremron units, cut edges where needed, and fill joints with the right sand for the application: polymeric for most flatwork, pool-rated where chemical exposure is a factor.
- 5
Test and walkthrough. We check for lippage, drainage pitch, and edge stability, then walk the whole area with you. You get the signed 365-Day Done Right Promise in your hand at job close. Clean site, documented scope, written guarantee. Squared away.
See the difference
Before
After
Before
After
Before
AfterTremron Products We Service & Install in Dallas
We work on the full Tremron hardscape range, but these are the ones we see most often across Dallas:
- Tremron Mega Olde Towne pavers – large-format paver, common on patios and pool decks
- Tremron Catalina pavers – a tighter, versatile paver used for driveways and walkways
- Tremron Stonegate retaining wall block – retaining walls, planter beds, and grade changes
- Tremron Bullnose coping units – pool coping and step edges
We keep factory-fresh units and salvaged older-run stock locally for color-matched repairs. If you’re adding onto an existing Tremron patio or replacing a damaged section, we can pull a match that won’t look like a patch.
We Also Service These Brands
Tremron is a major part of our hardscape work, but we’re not tied to one manufacturer. Bradford Remodeling Co Dallas also works with KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures on interior remodeling. Inside or outside, the standard’s the same: written price, documented scope, and a full-year guarantee on the work.
FAQs – Tremron Construction Service in Dallas
That white residue is efflorescence, caused by mineral salts in the paver or base wicking to the surface as water evaporates. In Dallas, sprinkler overspray and heavy morning dew cycles make it worse. It can be cleaned with the right efflorescence remover and the paver can be sealed to reduce recurrence, but the water source has to be addressed first. Call (903) 326-8963 and we’ll identify the water source and give you a written cleaning price.
We can get close. Factory-fresh units from the same Tremron line won’t have ten years of UV fading on them, so they’ll read as slightly newer. Our best match comes from older-run pavers we’ve kept in local stock from past Dallas jobs. When exact match isn’t possible, we can pull pavers from a less-visible section and use those for the repair, then set the fresh units where they blend better.
We pull the sunken section, inspect the base, and determine whether the subgrade failed or water is undermining the area. Around Dallas pools, we often find the original base was sand over un-compacted clay, and it never stood a chance. We re-compact the subgrade, install geotextile, rebuild the base in lifts, and re-set the pavers. For a section under, say, 40 square feet, you’re looking at $800 to $2,500 depending on base depth and access.
For a paver driveway on expansive clay, we build at least 6 inches of compacted crushed concrete base, plus geotextile between the clay subgrade and the base. That’s deeper than what many crews use on a patio. Dallas clay expands when wet and shrinks when dry, so the base has to bridge that movement or the pavers will telegraph every crack and swell. A Tremron paver driveway in Dallas typically runs $7,000 to $18,000 depending on square footage, access, and site prep.
It depends on how far it’s moved. If the blocks have rotated but the wall hasn’t structurally failed, we can sometimes pull the top courses, correct the drainage behind the wall, and re-stack. If the base course has shifted, a rebuild is the only honest answer. We’ll pull the wall apart, add drainage gravel and geogrid if the original contractor skipped it, and reconstruct it so it holds. Replacing individual damaged Tremron Stonegate blocks runs $40 to $120 per block; a full rebuild gets priced by linear foot and wall height.
Here are the market-calibrated ranges for the Tremron work we do in Dallas:
| Service | Dallas Price Range |
|---|---|
| Paver Patio Installation (Tremron) | $3,500 – $11,000 |
| Paver Driveway Installation (Tremron) | $7,000 – $18,000 |
| Re-level sunken Tremron paver section | $800 – $2,500 |
| Replace damaged Tremron retaining wall block | $40 – $120 per block |
These are real numbers, not placeholder ranges. Your exact price depends on square footage, base condition, drainage needs, and access. Call (903) 326-8963 for a written estimate and we’ll give you a firm line-item number before any work begins.
Book Your Tremron Service in Dallas, TX
If your Tremron pavers are sinking, turning white, drifting, or your retaining wall is leaning, call (903) 326-8963. We’ll come out, diagnose it, and put a written price in your hand. Straight number, real scope, no surprises on delivery day.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
