Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Dallas?
Custom window and door orders in Dallas typically run between $9,500 and $32,000 for a full-home project, with individual custom doors ranging from $1,800 to $6,500 and custom windows from $800 to $2,400 per unit. These figures include materials, labor, and standard installation, though the final price moves with material choice, glass package, and how many openings you’re ordering. A written, line-item quote before any work begins is the only way to pin down your exact number.
At Bradford Remodeling Co Dallas, we put that number on paper before you sign anything. Curtis Lane runs our Dallas operation under The Garrison Standard, which means the price you’re quoted is the price you pay, and every custom window or door we install carries the 365-Day Done Right Promise in writing.
Custom Window & Door Order Cost Breakdown (2026)
Here’s what custom window and door orders cost in the Dallas market as of 2026, broken down by the line items you’ll actually see on a bid sheet.
| Line Item | Typical Dallas Range |
|---|---|
| Custom entry door (single, wood or fiberglass) | $1,800 – $6,500 |
| Custom patio door (sliding or French, 6-8 ft) | $2,400 – $7,800 |
| Custom window (double-hung or casement, standard size) | $800 – $2,400 per unit |
| Custom window (picture or specialty shape) | $1,200 – $3,800 per unit |
| Interior custom door (solid core, pre-hung) | $450 – $1,600 each |
| Hardware upgrade (handlesets, hinges, locks) | $150 – $900 per opening |
| Trim, casing, and interior finish work | $300 – $1,200 per opening |
| Labor and installation (per opening) | $350 – $1,100 |
Those numbers reflect what we see across Dallas neighborhoods, from Preston Hollow to Lakewood to the M Streets. Older homes in East Dallas and Oak Cliff tend to run higher on labor because the rough openings are rarely square, and the framing often needs correction before a custom unit will seat properly. Newer construction in the northern suburbs generally costs less on labor but more on the glass packages homeowners in those areas tend to spec.
The biggest cost driver is the door or window itself. A Therma-Tru custom entry door with a decorative glass insert and a fiberglass frame will land at the top of that range because you’re paying for a documented manufacturing process and a product spec sheet that backs the warranty. A basic wood interior door with no glass runs toward the bottom. Both have their place. The key is knowing exactly what you’re getting, which is why we work from a fixed roster of manufacturers with published specifications.
What Affects Custom Window & Door Order Pricing in Dallas
- Material choice. Fiberglass and steel run more than wood, but they hold up better against Dallas heat and humidity. Wood offers the traditional look but requires more maintenance over a 20-year span, and that’s worth factoring into your total cost of ownership, not just the invoice.
- Glass package and energy rating. Double-pane Low-E glass is now the baseline in Dallas because the summer sun works harder here than almost anywhere in the country. Triple-pane or impact-rated glass pushes the price up, but it’s the right call for homes facing west exposure or sitting in storm-prone areas of the metroplex.
- Size and configuration. A standard 3×5 double-hung costs one thing. A 6-foot picture window with a custom arch costs something else entirely. Every square foot of glass adds material cost, and specialty shapes add fabrication time.
- Rough opening condition. In older Dallas homes, we regularly find framing that’s drifted out of square over decades of foundation movement. The clay soil here expands and contracts aggressively, and that shows up in window and door openings. Correcting the substrate and reframing the opening is sometimes $300 to $900 in additional labor before the new unit even goes in.
- Interior and exterior trim scope. A full custom order often means new casing, new sill, new brickmold on the outside, and sometimes stucco or siding repair around the opening. That finish work adds up, and it’s where cheap bids quietly undercut the scope.
- Quantity. Ordering one custom window costs more per unit than ordering eight. Fabricators and suppliers price per order, and shipping a single unit across DFW is not proportionally cheaper than shipping a crate of ten.
How to Save on Custom Window & Door Order
Saving money on custom work is less about finding the lowest bid and more about controlling scope. Here’s what we tell homeowners in Dallas who want a fair price without cutting corners.
- Order all openings at once. A single fabrication order for every window or door in the house reduces per-unit cost. You also avoid paying for multiple delivery windows and multiple days of crew mobilization.
- Standard sizes where they work. Custom doesn’t have to mean oddball. If a standard rough opening size fits your existing framing, order a custom unit in that footprint. You save on fabrication and on framing labor.
- Choose materials for the Dallas climate, not for the photo. A fiberglass door with a wood-grain texture gives you the look without the warping risk during humid summers. That’s money saved on future maintenance and replacement.
- Keep existing trim where it’s in good shape. If the interior casing is paint-grade and intact, we can often install the new unit without replacing trim. That’s a real line-item saving on every opening.
- Get the written price up front. This is where The Garrison Standard matters. A written quote locks your number. No surprises at the door, no re-pricing mid-project. You can’t save money you weren’t expecting to spend in the first place.
If you’re weighing options, call Curtis Lane at (903) 326-8963. We’ll talk through your project, give you a real number range, and put the final figure in writing before any work starts. Estimates are free.
How Long Does a Custom Window and Door Order Take in Dallas?
Fabrication lead times in Dallas currently run 4 to 8 weeks for most custom units, with specialty glass or oversized products sometimes pushing 10 weeks. Installation itself is typically 1 to 3 days depending on how many openings are involved.
The Dallas supply chain has settled since the disruptions of a few years ago, but custom orders are still built to spec, not pulled off a shelf. When you order a Therma-Tru or Marvin product through Bradford Remodeling Co Dallas, the manufacturer cuts and assembles it after your deposit, which means lead time is part of the process. We set expectations on that up front and keep you posted as the order moves through fabrication.
Custom Window & Door Order vs. Stock: What’s the Real Difference in Dallas?
A stock door from a Dallas big-box store costs $300 to $1,200 and lands in your car the same day. A custom door from a manufacturer like Therma-Tru costs $1,800 to $6,500 and takes 4 to 8 weeks to arrive. The difference is fit, materials, glass quality, and warranty coverage.
Stock units are built in common sizes with thin frames and basic glass. In a Dallas summer, that means more heat transfer, more air leakage around the frame, and a shorter service life. Custom units are built to your exact opening, with the glass package you specify for the sun exposure your house actually has. The warranty is also meaningful, not just a piece of paper. For homeowners planning to stay in the house more than five years, custom is usually the better math.
We also handle the broader scope around window and door work. If you’re replacing multiple openings in a kitchen remodel, the custom window and door order in Dallas coordinates with the cabinet layout and the countertop run, which matters more than most people expect when it comes to sight lines and natural light.
FAQs – Custom Window & Door Order Cost
How much does a custom front door cost in Dallas?
A custom front door in Dallas runs $1,800 to $6,500 installed, with the average coming in around $3,200 for a fiberglass unit with decorative glass and upgraded hardware. Wood doors at the top of the range will push past $5,000, especially with a custom finish and side lites. Call (903) 326-8963 for an exact quote on your entry, and we’ll put the number in writing.
Is it cheaper to buy windows and doors yourself and hire an installer?
It’s rarely cheaper, and it’s usually more expensive when something goes wrong. Homeowners in Dallas who buy their own units typically save 10 to 15 percent on materials, then lose that savings on installation corrections when the products don’t match the openings or arrive damaged with no installer taking responsibility. A full-service order through Bradford includes the product, the installation, and the 365-Day Done Right Promise on all of it as one written guarantee.
How much does it cost to replace all the windows in a Dallas house?
A full-house window replacement in Dallas runs $4,500 to $15,000, depending on the number of windows, the glass package, and whether the openings need reframing. A typical 3-bedroom Dallas home with 10 to 14 windows lands between $7,000 and $12,000. Energy-efficient Low-E glass, which we recommend for Dallas sun exposure, is now standard in most of our custom orders.
Do custom windows and doors increase home value in Dallas?
Yes, and the return is strongest on the front entry and on energy-rated windows. In the Dallas market, a custom front door with curb appeal typically returns 60 to 70 percent of its cost at resale, while energy-efficient windows appeal to Dallas buyers who know what July air conditioning bills look like. The value is in the documented product, which is why we install brands with published specifications, not no-name imports.
Can you do a custom window and door order the same day?
Same-day installation isn’t realistic for true custom work in Dallas, because the units are fabricated to your measurements after the order is placed. That said, we can often get measurements on the same day you call, start the order immediately, and handle existing installation openings within a week on select stock-adjacent products. Call (903) 326-8963 and we’ll tell you honestly where your project falls.
What does the 365-Day Done Right Promise cover on window and door work?
The 365-Day Done Right Promise covers the installation and workmanship on your custom windows and doors for a full year from the day we finish. If anything fails, shifts, leaks, or doesn’t perform as specified within that window, Bradford Remodeling Co Dallas returns and corrects it at no charge. Manufacturer warranties on the products themselves run longer and are documented in your closeout package.
Get a Written Quote from Bradford Remodeling Co Dallas
If you’re planning a custom window or door order, start with a conversation and a written price. Call (903) 326-8963 to reach Curtis Lane and the Bradford team. We’ll walk the project with you, take real measurements, and give you a line-item bid that won’t move at the door. Every project we take on gets documented scope, a scheduled timeline, and the 365-Day Done Right Promise in your hand when we finish. No surprises, no re-pricing, no unfinished work.
Pricing reflects the Dallas market as of 2026. Bradford Remodeling Co Dallas offers free estimates – call (903) 326-8963.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
What Our Customers Say
"Kitchen remodel run by a veteran-owned crew. They started on the day promised, kept the site clean, and gave weekly updates. New cabinets and counters look great."
- Alan M."Solid job. Small punch list items were done within a few days of the walkthrough."
- Beth K."Painting and drywall repair were flawless. They patched the drywall seams and the paint matches the old wall."
- Cal P.
