Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Vinyl Fence Installation Cost in Dallas?
Vinyl fence installation in Dallas typically runs $3,500 to $9,000 for a standard residential yard of 150 to 200 linear feet, with most homeowners landing around $5,500. That figure includes materials, labor, concrete footings, gate hardware, and disposal of any old fence. The spread comes down to fence height, style (privacy vs. picket), soil conditions, and whether you’re pulling an existing fence first.
At Bradford Remodeling Co Dallas, we put that number in writing before the first post hole is dug. No revised quote at the door, no “we found something in the ground” markup. The price we hand you is the price on the invoice unless you change the scope.
Key Takeaways
- Expect $3,500 – $9,000 for a full vinyl fence install in Dallas, with $5,500 as a realistic midpoint for a 175-linear-foot privacy fence.
- Per-linear-foot pricing in Dallas runs $20 – $50 installed, depending on height, style, and terrain.
- Gate additions run $250 – $700 per gate, including hardware.
- Old fence removal adds $3 – $8 per linear foot depending on post condition.
- Dallas clay soil and shifting ground make post depth and concrete footings a bigger factor here than in sandy regions.
- Bradford Remodeling Co Dallas gives a written price before work starts and covers every install under the 365-Day Done Right Promise.
Vinyl Fence Installation Cost Breakdown (2026)
Here’s what the numbers actually look like for the Dallas market this year. These ranges assume a standard residential project with level-to-moderate grade, average Dallas clay soil, and normal access to the fence line.
| Line Item | Typical Range (Dallas, TX) |
|---|---|
| Vinyl privacy fence, 6 ft, per linear foot installed | $25 – $45 |
| Vinyl picket fence, 4 ft, per linear foot installed | $18 – $32 |
| Vinyl semi-privacy fence, 5 ft, per linear foot installed | $22 – $38 |
| Standard 175-linear-foot privacy fence, complete | $4,400 – $7,900 |
| Old fence removal and haul-off, per linear foot | $3 – $8 |
| Single walk gate (4 ft), with hardware | $250 – $500 |
| Double drive gate (10 – 12 ft), with hardware | $500 – $900 |
| Concrete post footings, per post | $20 – $45 |
| Permit coordination (Dallas development services) | $150 – $400 |
| Grading or minor terrain correction | $300 – $1,200 |
What pushes a project toward the top end? Long fence lines with multiple corners, drive gates with heavy framing, steep grade changes (common in neighborhoods around White Rock Lake and the Cedar Ridge area), and old chain-link or wrought iron that has to come out first. What keeps it lower? A straight run on flat ground, a simple two-gate layout, and soil that cooperates.
Dallas sits on expansive clay that shifts with moisture. That means posts need to be set deeper than code minimum in many yards, and footings need more concrete than installers might pour in Fort Worth’s sandier pockets. A fence that skips proper post depth here will lean within three years. Our crews set posts below the freeze line and backfill with concrete regardless of what the soil looks like on dig day, because pulling up a leaning fence later is more expensive than doing it right the first time.
What Affects Vinyl Fence Installation Pricing in Dallas
- Fence height and style. A 4-foot picket fence is the cheapest vinyl option, a 6-foot privacy panel is the standard, and anything over 6 feet (allowed in many Dallas neighborhoods with HOA sign-off) drives material and post costs up fast.
- Linear footage and layout. More fence costs more, but so do corners. Every corner adds a post, additional rails, and more labor. A 175-foot run with four corners often costs more than a 200-foot straight run.
- Old fence removal. If you have a rotted wood fence or rusted chain-link on the property line, it has to come down and get hauled off. Dallas disposal fees and post-puller time add $3 – $8 per foot.
- Soil and drainage. North Texas clay expands and contracts aggressively. In low-lying areas around Bachman Lake and along the Trinity River corridor, softer ground can require deeper footings or extra concrete. We price this at the estimate stage, not as a surprise later.
- Permits and HOA requirements. Many Dallas HOAs (Lake Highlands, Preston Hollow, Kessler Park) have specific fence height, color, and placement rules. Bradford handles permit paperwork and HOA submittals as part of the written scope, including the city’s fence permit fee when required.
- Gate count and type. A single walk gate is modest. A double drive gate with steel reinforcement inside the vinyl posts is a different animal and can add $500 – $900 per gate on its own.
How to Save on Vinyl Fence Installation
The biggest money-saver is getting the scope right the first time. A fence that gets torn out and redone because posts were shallow or the layout didn’t match the survey is the most expensive fence you’ll ever buy. Here’s what actually moves the needle without cutting quality:
- Do the demo yourself if you’re able. Removing old fence panels is labor, not skill. If you can take down the old fence and haul it, you’ll save $3 – $8 per foot. Leave the post extraction to the crew, though, especially if posts are set in concrete.
- Choose the right height for what you need. A 5-foot semi-privacy fence gives you yard separation and pet containment for 15 – 20% less than a 6-foot privacy panel. If true privacy isn’t the goal, don’t pay for it.
- Install in the off-season. Fence demand in Dallas peaks from March through July. Scheduling in the late fall or winter often gets you better crew availability, and some materials see volume pricing in the slower months.
- Minimize gates. Every gate is a custom opening with hardware and reinforcement. One walk gate on each side of the house is enough for most yards. Skip the extra gate nobody uses.
- Bundle work. If you’re already doing a vinyl fence installation in Dallas as part of a larger exterior project, combining it with a patio or driveway job can reduce mobilization and shared costs. Bradford gives written pricing for each line item so you can see exactly what the bundle saves.
One thing that isn’t a savings lever: vinyl quality. Cheap vinyl panels yellow in the Texas sun, get brittle in the cold, and crack during hail season. Dallas gets hit with hail almost every year, and a low-grade panel will shatter on impact where a premium panel flexes. We install name-brand vinyl with manufacturer specs and warranties behind the product, so the material is documented and the warranty is enforceable, not a verbal promise.
Call (903) 326-8963 for a free estimate with a written price before any work starts. Estimates are no-pressure and no-obligation.
Vinyl vs. Wood vs. Aluminum: What You Get for the Money in Dallas
Vinyl fence installation in Dallas costs more up front than wood, and slightly less than aluminum. Here’s the honest comparison, because the cheapest option at signing is rarely the cheapest after five years in Texas weather.
- Wood (pine or cedar): $12 – $25 per linear foot installed. Cheapest up front, but Dallas heat and rain cycles warp and rot pine within 5 – 8 years. Cedar lasts longer but still needs sealing every 2 – 3 years. Over 15 years, wood usually costs more than vinyl in maintenance and replacement.
- Vinyl: $20 – $50 per linear foot installed. No painting, no sealing, no staining. Holds up to hail better than wood, doesn’t rot in wet seasons, and cleans with a hose. Fades very slowly in direct Texas sun, but premium panels carry UV-stabilized color that holds for 15 – 20 years.
- Aluminum: $25 – $55 per linear foot installed. Strong and low-maintenance, but doesn’t provide privacy unless you add panels. Good for pool enclosures and decorative perimeter lines. Doesn’t yellow, but can dent under a hard tree branch or hail hit.
For most Dallas homeowners fencing a backyard, vinyl hits the sweet spot: privacy, low maintenance, and a lifespan that outruns the mortgage interest on the project. Our team installs what the yard needs, not what’s easiest to quote. That’s part of how Bradford operates under The Garrison Standard: the quote reflects the right solution, not the convenient one.
What the Install Process Looks Like
The work itself usually takes 2 – 4 days for a standard residential vinyl fence in Dallas, depending on footage, terrain, and whether old fence removal is in the scope. Here’s how it runs when Bradford installs:
- Site walk and written estimate. We measure the actual fence line, check the soil, look at access, and confirm property boundaries. You get a written price before anything is scheduled.
- Call-before-you-dig and permits. We handle the 811 utility locate request and any Dallas permit paperwork. If your HOA needs an approval letter, we put that in the scope as well.
- Post setting. Posts go in first, set in concrete at the depth the soil demands. In Dallas clay, that’s usually 24 – 30 inches depending on fence height. We don’t cut corners here; the fence rides on the posts.
- Panel and gate installation. Panels slot into routed posts, rails lock in, and gates get hung with steel reinforcement where needed.
- Cleanup and walkthrough. Site is cleared of scrap, dirt, and packaging. You walk the fence with the crew lead, confirm gate swing, spacing, and footing coverage, and sign off with the written 365-Day Done Right Promise in hand.
That last part matters. Bradford Remodeling Co Dallas is part of the Garrison Partners family, established in 2004, and held to The Garrison Standard on every project. That standard includes a written price before work begins, background-checked and uniformed technicians on site, and a live person answering the phone 24/7. The 365-Day Done Right Promise is the backstop: if our fence work fails within a year of completion, we come back and fix it at no charge. Not a prorated credit. A fix.
How Much Does It Cost to Replace an Existing Fence in Dallas?
Replacing an existing fence adds the removal line: $3 – $8 per linear foot to take down the old fence and haul it off. For a 175-foot run, that’s $525 – $1,400 on top of the install price. If the old posts are set in concrete, removal takes longer, which is why the range is wide.
Total replacement for a typical Dallas backyard is $4,000 – $10,400 when you factor in new vinyl, removal, and disposal. If the existing fence is wood and in poor shape, pulling it before it falls over saves you a repair call and a safety hazard in one move.
FAQs – Vinyl Fence Installation Cost
How much does a vinyl fence cost per foot in Dallas?
Installed vinyl fence in Dallas runs $20 – $50 per linear foot for most residential projects in 2026. A standard 6-foot privacy panel lands around $25 – $45 per foot, while a 4-foot picket fence is usually $18 – $32. The final per-foot price depends on height, style, soil, and whether old fencing needs removal. Call (903) 326-8963 for a written, per-foot quote on your exact fence line.
Is vinyl fence cheaper than wood in Dallas?
No, not up front. Wood fence installation in Dallas runs $12 – $25 per foot versus $20 – $50 for vinyl. But over 15 years, vinyl usually wins on total cost because it needs no staining, sealing, or rot replacement. In Dallas’s wet-dry cycle, wood fences typically need major repair or replacement by year 8 – 10. Vinyl panels from quality manufacturers carry UV-stabilized color that holds for 15 – 20 years.
How long does vinyl fence installation take in Dallas?
Most residential vinyl fence installs in Dallas take 2 – 4 days from first post hole to final gate adjustment. Larger properties, steep grades, or old fence removal can push that to 5 – 6 days. Bradford schedules the full crew for the duration and doesn’t split time between jobs mid-project. When we’re on your fence, we’re on your fence until it’s done.
Do I need a permit for a vinyl fence in Dallas?
Most Dallas residential fence projects do not require a building permit if the fence is under 8 feet tall and outside a floodplain, but many HOAs require design review approval, and some properties near public right-of-ways need a fence permit. Permit fees, when applicable, run $150 – $400. Bradford handles the permitting and HOA paperwork as part of your written scope, so nothing gets held up at inspection.
What does the 365-Day Done Right Promise cover?
It covers the fence work Bradford installs. If any part of the vinyl fence installation fails within 365 days of completion – a leaning post, a sagging gate, a cracked rail, a footing issue – Bradford Remodeling Co Dallas comes back and corrects it at no charge. It’s a written guarantee, not a verbal one. The Gunnar Standard requires it on every project we run.
Pricing reflects the Dallas market as of 2026. Bradford Remodeling Co Dallas offers free estimates – call (903) 326-8963.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
What Our Customers Say
"Home remodel with a new floor plan. Handled structural work and permits without drama."
- Gus R."Great work. Countertop install slipped by a week, but they explained and kept us informed."
- Nora L."Fixed price, written scope, and no surprise charges."
- Wes D.
