Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Dallas Homeowners Choose Mr-Glass Construction
Bradford Remodeling Co Dallas provides independent Mr-Glass construction service and repair across Dallas, TX, specializing in shower enclosures, glass panels, and custom glass systems. We’re not a factory-authorized service center, but our crews work on Mr-Glass enclosures weekly, and we train specifically on the brand’s frame alignments, roller cartridges, and sealant protocols so we can diagnose and service them without factory authorization. If your Mr-Glass shower door drags, leaks, or the rollers are shot, call (903) 326-8963 and we’ll give you a written price before any work starts.
Dallas homes put Mr-Glass enclosures through conditions most manufacturers never plan for. Hard water from city supply lines leaves mineral scale on glass and tracks. Summer humidity keeps silicone seals damp long after a shower ends. Expansive clay soil shifts slabs and throws door frames out of square. We know these failure modes because we fix them every week across neighborhoods from Lakewood to North Dallas to the M Streets, and we also provide Garland Mr Glass service for homeowners just east of the city.
Why Trust Bradford Remodeling Co Dallas for Your Mr-Glass Construction?
Curtis Lane, our owner, picked up his first framing hammer in a residential carpentry program at Los Angeles Trade-Technical College, and he’s spent the better part of two decades running crews across Dallas. That includes a stretch of kitchen and bathroom gut-jobs in Lakewood, where 1950s-era plaster taught him exactly how much patience a remodel demands. When our technicians show up at your door, they’re background-checked, uniformed, and they know Mr-Glass hardware.
Our Mr-Glass work follows The Garrison Standard: a written price before any tools come out, a documented scope, and a signed 365-Day Done Right Promise handed to you at close. If the service fails within a year, we return and correct it at no charge. Every Mr-Glass enclosure we service gets the same treatment: diagnose the real problem, quote the real number, and stand behind the work. Straight number, real scope, no surprises on delivery day.
We’re an independent Mr-Glass service provider, not a factory-authorized dealer. That matters in one important way: we recommend what’s right for the enclosure, not what’s dictated by a brand playbook. When genuine Mr-Glass parts make sense, we use them. When an exact-fit aftermarket roller set does the job at half the cost, we tell you that too, in writing.
Styles & brands we work with
Common Mr-Glass Construction Problems We Fix in Dallas
- Sagging door panels on Mr-Glass sliding enclosures. The most common call we get. Worn roller cartridges on Mr-Glass Sliding Glass Shower Doors lose their bearing surface, and the panel drops until it scrapes the bottom curb. In Dallas, hard water grit accelerates the wear. We replace the cartridges, shim the header, and re-balance the door so it glides clean.
- Hard water etching and mineral buildup on low-iron Mr-Glass panels. Dallas city water runs hard. Mr-Glass panels with low-iron glass look clear when new, but mineral scale bonds to the surface and creates a haze that won’t wipe off. We remove what’s removable and tell you honestly when a panel has gone too far and needs replacement.
- Failed silicone seals at Mr-Glass enclosure bases. The seal between the curb and the bottom track breaks down from constant wet-dry cycling in Dallas humidity. Water seeps through and soaks the subfloor. We strip the old silicone, clean the substrate, and re-seal with a sealant rated for continuous moisture exposure.
- Stripped hinge screws on Mr-Glass frameless clips. Frameless Mr-Glass panels hang on hinge clips screwed into wall studs or blocking. Repeated adjustment or undermounting strips those screws, and the panel loses its anchor. We re-drill, install proper blocking where needed, and reset the hinge geometry.
- Track jump on Mr-Glass sliding doors. When the header or curb track shifts out of alignment due to slab movement, the roller wheels skip. Dallas clay soil expands and contracts, and door frames move with it. We re-level the track and shim the header back to square.
Mr-Glass Parts & Our Repair-vs-Replace Approach
For Mr-Glass enclosures we use genuine Mr-Glass hardware when it’s available locally and the job calls for it. We also keep quality aftermarket roller assemblies and seals that match exact track gauges for Mr-Glass sliding and neo-angle systems. That means faster turnaround and a lower price on common wear items without compromising fit.
Our rule is simple: we repair panels unless the glass is cracked or severely etched, then we recommend full enclosure replacement. A scratched track, worn rollers, failed seals, stripped hinges? Those are repairs. A cracked glass panel or a surface so mineralized it’s permanently clouded? That’s replacement. We’ll show you the difference, quote both paths when it applies, and let you decide with a written number in hand. Call (903) 326-8963 for pricing on your specific Mr-Glass setup.
| Mr-Glass Service | Dallas Price Range |
|---|---|
| Mr-Glass roller cartridge set | $80 – $200 |
| Mr-Glass enclosure full replacement (standard 60″ bypass) | $3,500 – $8,500 |
| Frameless shower enclosure install (labor + hardware, no glass) | $4,500 – $9,000 |
These ranges reflect what we see across Dallas on Mr-Glass work. Your exact price depends on the enclosure size, glass type, and what’s actually failed. We’ll put the exact number in writing before we touch anything.
Our Mr-Glass Service Process – Step by Step
- 1
Diagnosis. A technician inspects the enclosure, checks track alignment, roller wear, seal condition, and glass surface. We identify whether the failure is mechanical, seal-related, or structural. For Dallas homes, we check for slab movement signs that affect door geometry.
- 2
Written quote. You get a line-item price before work starts. No numbers that move at the door. If the fix is a $90 roller set, that’s what you pay. If the enclosure needs full replacement, we quote it straight.
- 3
Repair or install. We replace worn Mr-Glass rollers with exact-fit sets, re-shim headers, re-bond seals, or install new enclosures. For tub-to-shower conversions on existing Mr-Glass setups, we evaluate whether the glass and frame can be reused or need replacement.
- 4
Testing. Every door gets cycled across its full travel. Every seal gets a water test. Every hinge gets a torque check. We’re not done until the door glides without drag and the base stays dry.
- 5
365-Day Done Right Promise. You leave with a signed written guarantee. If anything fails within a year, we return and correct it at no charge. That’s The Garrison Standard, and it applies to every Mr-Glass job we complete in Dallas.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Products We Service & Install in Dallas
Our crews work on the full Mr-Glass lineup: Neo-Angle Shower Enclosures, Sliding Glass Shower Doors, Frameless Glass Shower Panels, and Custom Glass Shelving & Tabletops. We stock common track gauges and roller profiles locally so standard repairs don’t wait on shipping. For custom glass, we measure on site, order the panel to spec, and install with the same alignment protocols we use on factory-built enclosures.
We Also Service These Brands
Bradford Remodeling Co Dallas works across the premium construction brand landscape as a licensed General Contractor. Alongside Mr-Glass, our Dallas crews install and service KraftMaid and Wellborn cabinetry, Cambria and Silestone surfaces, and Kohler fixtures. That multi-brand depth means we understand how your Mr-Glass enclosure integrates with the rest of the bathroom, not as an isolated piece.
FAQs – Mr-Glass Construction Service in Dallas
Yes, in most cases. If the Mr-Glass frame, header, and track are square and undamaged, we can source and install a single replacement panel to match the existing glass thickness and edge profile. The exception is when the frame has shifted from slab movement or the original panel is so old that an exact glass match isn’t available. We’ll tell you which situation applies before you spend a dollar. Call (903) 326-8963 for a written quote on panel replacement.
Track jump happens when the Mr-Glass roller wheels lose contact with the lower track, usually because the header has shifted out of level or the rollers are worn and sloppy. In Dallas, expansive clay soil moves door frames seasonally, and that shift throws the track geometry off. The fix is re-leveling the track and replacing any worn roller cartridges. We see this weekly across Dallas. Call (903) 326-8963 and we’ll diagnose it on site.
Yes. Dallas city water leaves mineral scale on glass surfaces, and frameless Mr-Glass panels show it more than framed units because there’s no metal frame to hide buildup behind. A squeegee after each shower helps, but most Dallas homeowners need a periodic mineral deposit removal to keep the glass clear. We perform that service and can recommend a sealant treatment that slows re-deposits. It won’t stop hard water entirely, but it extends the time between deep cleans.
Sometimes. If the existing Mr-Glass glass panels are in good condition and the frame can be re-configured, we can convert the tub setup to a walk-in shower using the existing enclosure as a partial surround. If the glass is etched, cracked, or the frame is too corroded, full replacement becomes the better path. We’ll evaluate your specific Mr-Glass unit and give you a straight answer either way. Call (903) 326-8963 to schedule that evaluation.
Bradford Remodeling Co Dallas is an independent service provider, not an authorized Mr-Glass warranty station. Manufacturer warranty terms vary, and some may be affected by third-party service. What we guarantee is our own work: every repair and installation we perform carries the 365-Day Done Right Promise, a written one-year guarantee from us. If our work fails within that year, we return and correct it at no charge.
Mr-Glass service in Dallas ranges from $80 for a roller cartridge set to $8,500 for a full standard bypass enclosure replacement. The middle ground, frameless enclosure installation with labor and hardware but no glass, runs $4,500 to $9,000. Your exact number depends on what’s failed and what you’re replacing. We give you a written price before work starts, every time. Call (903) 326-8963 for an exact quote on your Mr-Glass enclosure. Estimates are free.
Book Your Mr-Glass Service in Dallas, TX
If your Mr-Glass enclosure is dragging, leaking, or the glass has gone cloudy, call Curtis Lane’s team at Bradford Remodeling Co Dallas. Dial (903) 326-8963 and you’ll get a live person, a written price, and work backed by the 365-Day Done Right Promise. We handle Mr-Glass construction repair and service across Dallas properly and without excuses, and we also offer Mr Glass in Sunnyvale for homeowners in that area.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
