Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Mr-Glass Construction in Dallas, TX | Bradford Remodeling Co Dallas
We provide independent Mr-Glass window, shower enclosure, and glazing service across Dallas from our local Bradford Remodeling Co Dallas operation. What separates our Mr-Glass work here is simple: we know which failures are actually caused by Dallas clay soil, hail, and heat, and which ones are just age. That’s the difference between replacing a $200 sash and chasing a foundation problem that will crack the next one too. If you’re dealing with a fogged Mr-Glass dual-pane, a 7100 slider that jams after every dry spell, or a frameless shower door that no longer closes square, call (903) 326-8963 for a written estimate.
Why Dallas Residents Choose Us for Mr-Glass Service
Our crews work on Mr-Glass products in hundreds of North Texas homes every year. We handle the 5010 Series single-hungs in 1970s brick-veneer ranches, the 6000 Series double-hungs with low-E glass in 1990s suburban builds, and the 7100 Series sliders and frameless heavy glass shower enclosures that show up in modern infill townhomes. Curtis Lane, who runs Bradford Remodeling Co Dallas, spent years doing Kitchen Remodeling - Dallas and bath gut-jobs in Lakewood before taking over this operation. That experience matters because Mr-Glass installations don’t exist in a vacuum. The same clay soil that shifts a slab foundation also pulls a shower door out of plumb. We see the full picture before we touch a single sash.
We’re an independent Mr-Glass service provider. That’s worth stating plainly. We are not manufacturer-affiliated or authorized, which means we’re free to tell you when a repair makes sense and when a replacement is the honest call. We use genuine Mr-Glass hardware where it matters for fit and warranty continuity on moving parts like balances and rollers. Where it doesn’t matter, we’ll say so.
Key Takeaways:
- We service Mr-Glass 5010, 6000, and 7100 Series windows and doors, plus frameless shower enclosures, across Dallas.
- We’re an independent provider, which means straight answers on repair versus replace.
- Written price before any work starts, every time.
- 365-Day Done Right Promise: if the work fails inside a year, we return and correct it at no charge.
Styles & brands we work with
Common Mr-Glass Construction Problems We Solve in Dallas
- Fogging between panes on older dual-pane windows. Dallas hailstorms crack the seal on Mr-Glass dual-pane units without breaking the glass. The seal fails, condensation gets in, and the sash looks cloudy. We price a fogged-glass repair honestly against a full sash replacement so you can decide based on remaining life.
- Roller and track wear on 7100 Series sliders. Fine Dallas clay dust grinds into the track every time someone opens the door. After a few years, the rollers chew through and the panel drags. We replace rollers and tune the track rather than slapping in a whole new door unless the frame itself is shot.
- Sagging or misaligned frameless shower door hinges. In Dallas pier-and-beam homes, clay soil shifts the floor enough that a frameless Mr-Glass enclosure falls out of square. The hinges sag, the door drags, and the gap opens up. We reset the hinges and re-align the door to the current floor plane.
- Warped or brittle vinyl glazing beads on 5010 and 6000 frames. Years of intense North Texas sun and 100°F plus attic heat doesn’t just fade the frames. It cooks the vinyl beads until they crack and fall out. We replace the glazing beads with equivalent material that holds a seal.
- Cracked aluminum corner welds on 1980s 5010 sashes. This one’s a Dallas specialty, and we’ll get into the why below. The weld fails, the corner opens up, and dust and drafts pour through a window that looks perfectly fine from the street.
Mr-Glass Service in Dallas: What Local Conditions Mean for Your Equipment
Dallas sits on expansive clay, and that single fact shapes more Mr-Glass repair work here than any other variable. The soil shrinks during drought and swells after rain, which means foundations move. A lot. Many of the single-family homes built during the 1980s oil bust in Far North Dallas and Richardson used Mr-Glass aluminum-frame 5010 windows, and today those sashes are failing at the corner welds. We see this far more in Dallas’s shrink-swell clay zone than in Fort Worth’s sandier soils. The window doesn’t fail because the glass is bad. It fails because the house moved underneath it for thirty years and the aluminum weld finally gave out. That’s why our Mr-Glass service in Dallas always starts with a look at the frame, not just the glass. Replace the sash without checking the foundation and you’ll be back in the same spot in two years. If the corner weld is cracked, we’ll replace the unit. If the frame is racked, we’ll address that too.
Our crew pulled a dozen Mr-Glass 5010 sashes from a two-story brick veneer on Mimosa Lane in Richardson after a spring hailstorm. The glass was fine, but the aluminum corner welds had cracked from twenty years of clay-soil movement, letting in dust and drafts. We replaced the failed units with equivalent Mr-Glass 5010 sashes, reset the frames with shims, and the homeowner stopped chasing dust bunnies the same week.
Mr-Glass Models & Products We Service in Dallas
We work on the Mr-Glass 5010 Series single-hung windows, the 6000 Series double-hung windows with low-E glass, the 7100 Series sliding glass doors, and Mr-Glass frameless heavy glass shower enclosures. On moving parts like balances and rollers, we use genuine Mr-Glass hardware because fit and warranty continuity matter there. On discontinued or overpriced original parts, we won’t ask you to pay a premium for a sticker. We use equivalent commercial-grade glass units and weatherstripping when the original is no longer a sensible buy. For leaky dual-pane Mr-Glass sashes, we’ll line up a fogged-glass repair price next to a full sash replacement price so you can make the call based on how much life is left in the unit.
We also install impact windows, frameless glass shower enclosures, and walk-in showers across Dallas. For more on the full Mr-Glass story, see our Mr-Glass sales & service page. For where we work, check the Dallas service area coverage.
See the difference
Before
After
Before
After
Before
AfterMr-Glass Service Pricing in Dallas
What you’ll spend depends on what failed and how far it went. Here are the ranges we’re quoting across Dallas right now:
| Service | Dallas Price Range |
|---|---|
| Impact Window Installation | $8,000 – $25,000 |
| Window Replacement | $4,500 – $15,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Frameless Glass Shower Enclosures | Custom quote based on glass spec and opening size |
The spread exists because a 5010 sash on a ranch in Grand Prairie is a different job than a full impact window package on a two-story in North Dallas. What drives the number is glass spec, frame condition, and whether we’re repairing or replacing. Your written estimate lines out exactly what’s included. No numbers that move at the door. Call (903) 326-8963 and we’ll get you a line-item quote.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well as our General Contractor in Dallas. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mr-Glass Construction in Dallas
In most cases we can replace just the fogged glass unit, not the whole sash, provided the frame and hardware are still solid. The cost runs meaningfully lower than a full sash replacement, but the right call depends on how much life the frame has left. If the corner welds are cracked or the vinyl glazing beads are brittle, a new sash might be the better money. We’ll show you both numbers and tell you which one we’d pick at our own house. Call (903) 326-8963 for an exact quote on your window.
Sometimes, but not always. Dallas clay shrinks during drought, and if the slab shifts enough, the door frame racks and the panel binds. Other times it’s just fine clay dust ground into the rollers and track. We check both. If it’s the track, we clean and replace rollers. If it’s the frame, we address that before it gets worse. Either way, don’t force the door. You’ll chew the rollers past repair. Call (903) 326-8963 and we’ll diagnose it.
Yes, that’s common in Dallas. Hail can crack the seal between the panes without shattering the glass itself, and the fog shows up days or weeks later. The seal is the weak point, not the glass. We replace the dual-pane unit and reseal the sash so it holds through the next storm season. For an exact price on your Mr-Glass window, call (903) 326-8963.
Yes, they’re safe when they’re installed with the movement in mind. Pier-and-beam floors flex, and a frameless enclosure needs hinges that tolerate that without letting the door sag. We set the hinges to the current floor plane and check the alignment after the first month. If the floor shifts, we come back and re-align under the 365-Day Done Right Promise. Call (903) 326-8963 for a free estimate on a frameless enclosure.
We do both. If the frame is square and the track isn’t pitted, we repair the sash and the rollers. If the aluminum frame has oxidized or the corner welds are cracking from decades of clay-soil movement, we recommend replacement with a new unit that matches the opening. The free estimate tells you which route makes sense. Call (903) 326-8963 to schedule yours.
Service Areas Near Dallas
Our Mr-Glass crews cover Dallas and the surrounding cities, including Garland, Sunnyvale, Grand Prairie, Farmers Branch, and Duncanville. If you’re in one of those areas and you’re dealing with a fogged pane or a slider that grinds, we’ll send someone out. For specifics on those markets, see Mr-Glass service in Garland and Mr-Glass service in Sunnyvale.
Book Your Mr-Glass Service in Dallas Today
Call (903) 326-8963 and we’ll put a written price in your hand before any work starts. Same-day service on a failed Mr-Glass window or shower door. Straight number, real scope, no surprises on delivery day.
Written by Curtis Lane, Owner at Bradford Remodeling Co Dallas, serving Dallas since 2004.
